I was attracted to this place as a resource for creating 3d works for 28mm wargaming. Specifically, my love for old fashioned wargaming where it’s all do it yourself and custom armies. This has led me to make a resource where I can create and provide custom parts and full figures for wargamers. The main caveat of my modeling is that I want to produce NEW products at a REASONABLE cost. With individual model costs from traditional publishers rising I'd like to make weapons and accessories accessible to wargamers so they can have a variety of options for modeling.
My goal is not to just support one off products but really make it reasonable to outfit entire units or whole armies with my designs if so desired. And hopefully do so without breaking the bank. While I might reimagine items seen elsewhere occasionally I’d really like to produce things that haven’t been seen before allowing modelers to really customize their units.
The models here represent customs that either I have wanted to purchase or which fellow gamers have asked for and never had provided. If you have requests or ideas send me a request via Shapeways private messaging or at Dynath@gmail.com. Otherwise visit my blog dynath.blogspot.com for my latest projects.
As always your feedback is the best way for me to grow as an artist so I welcome your comments.
dynath is selling 92 products in Melee Weapons section
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, talk to the hand, suitable for 28mm sci-fi figured war gaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
I fixed this guy.
A pair of techno-fists doing rude hand jestures, up yours, suitable for 28mm war gaming miniatures. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of mechanical fists suitable for 28mm Wargaming miniatures. Hand is in the open possition. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, F*** You, suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of technofists in closed hand possition like punching. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists with integrated claws. Hand is in a closed possition. Model has 4 claws. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists with integral claws. Hand is closed. 3 Claws in a wolverine style design. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
A pair of techno-fists with integral flame throwers. Hand is in the closed possition. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
This is a sprue of 5 Techno-Axes suitable for 28mm gaming. Techno-Axe requires pinning to model's existing hand.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A sprue of 5 technological halberds suitable for 28mm wargaming. Halberd will require pinning to model's existing hands.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
Shop Details
Expertise
- 3D modeler
- Artist
Shop Sections
- All Sections
- Aliens
- Angry Marines
- Arms
- Aspecis of Mu
- Dalek Empire
- Female Marines
- Full Figures
- Full Vehicles
- General Armory
- General Gear
- helms
- Legio-Custodes
- Male Marines
- Melee Weapons
- Ranged Weapons
- Realms of Chaos
- Scythes of The Emperor
- Shoulder Pads
- Test Models (caution)
- The Cyber Dead
- the Emperor's Tide
- The Golden Legion
- Upgrade Sprues
