I was attracted to this place as a resource for creating 3d works for 28mm wargaming. Specifically, my love for old fashioned wargaming where it’s all do it yourself and custom armies. This has led me to make a resource where I can create and provide custom parts and full figures for wargamers. The main caveat of my modeling is that I want to produce NEW products at a REASONABLE cost. With individual model costs from traditional publishers rising I'd like to make weapons and accessories accessible to wargamers so they can have a variety of options for modeling.
My goal is not to just support one off products but really make it reasonable to outfit entire units or whole armies with my designs if so desired. And hopefully do so without breaking the bank. While I might reimagine items seen elsewhere occasionally I’d really like to produce things that haven’t been seen before allowing modelers to really customize their units.
The models here represent customs that either I have wanted to purchase or which fellow gamers have asked for and never had provided. If you have requests or ideas send me a request via Shapeways private messaging or at Dynath@gmail.com. Otherwise visit my blog dynath.blogspot.com for my latest projects.
As always your feedback is the best way for me to grow as an artist so I welcome your comments.
dynath is selling 25 products in Angry Marines section
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, talk to the hand, suitable for 28mm sci-fi figured war gaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
I fixed this guy.
A pair of techno-fists doing rude hand jestures, up yours, suitable for 28mm war gaming miniatures. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, F*** You, suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
A pair of techno-fists with integral flame throwers. Hand is in the closed possition. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A big technologically advanced 2 handed mace.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Chain saw tonfa's awesome ain't it! set of 10, enough to give pairs to a squad of 5.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
The weapon of choice of the angry marines is the Power Bat. Steel bound wooden fury sheathed in a field of good old fashioned hate... and zero particle ionization... but mostly hate... and some blood... maybe some brain matter.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Ok this has to be one of my more absurd ideas. But hey what can fit better in a british wargame than a hugely popular british past time.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A simple adaptation of the Aztec weapon the Macuahuitl. A traditional warclub with razor sharp obsidian blades around the paremeter. Conquistadors claimed the Macuahuitl could behead horses and penatrate their steel full plate armor. I figured bringing this weapon to the table top was worth the work.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Engineers need tools, all the better if they are giant head sized wrenches and the repairs you're making are beating the enemy's brains in.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A hand marked by a halo. its designed primarily for the Angry Marines to bitchslap the empra's enemies. However its also a good banner topper or iron halo idea for those who want hand themed items. either way, enjoy.
by
dynath
Checkout My blog: dynath40k.blogspot.com
A techno-chain axe with an older head design. Good for those dated armies hint hint, nudge nudge.
Shop Details
Expertise
- 3D modeler
- Artist
Shop Sections
- All Sections
- Aliens
- Angry Marines
- Arms
- Aspecis of Mu
- Dalek Empire
- Female Marines
- Full Figures
- Full Vehicles
- General Armory
- General Gear
- helms
- Legio-Custodes
- Male Marines
- Melee Weapons
- Ranged Weapons
- Realms of Chaos
- Scythes of The Emperor
- Shoulder Pads
- Test Models (caution)
- The Cyber Dead
- the Emperor's Tide
- The Golden Legion
- Upgrade Sprues
