I was attracted to this place as a resource for creating 3d works for 28mm wargaming. Specifically, my love for old fashioned wargaming where it’s all do it yourself and custom armies. This has led me to make a resource where I can create and provide custom parts and full figures for wargamers. The main caveat of my modeling is that I want to produce NEW products at a REASONABLE cost. With individual model costs from traditional publishers rising I'd like to make weapons and accessories accessible to wargamers so they can have a variety of options for modeling.
My goal is not to just support one off products but really make it reasonable to outfit entire units or whole armies with my designs if so desired. And hopefully do so without breaking the bank. While I might reimagine items seen elsewhere occasionally I’d really like to produce things that haven’t been seen before allowing modelers to really customize their units.
The models here represent customs that either I have wanted to purchase or which fellow gamers have asked for and never had provided. If you have requests or ideas send me a request via Shapeways private messaging or at Dynath@gmail.com. Otherwise visit my blog dynath.blogspot.com for my latest projects.
As always your feedback is the best way for me to grow as an artist so I welcome your comments.
dynath is selling 232 products in General Armory section
by
dynath
Test model for egyptian style torsos. Female figure, compatible with standard 28mm SM legs, arms, and heads. This test model has not been optimized for cost.
Note: not designed for copatability with my previous line of female marines.
by
dynath
Test model for egyptian style torsos. Male figure, compatible with standard 28mm SM legs, arms, and heads. This test model has not been optimized for cost.
by
dynath
the product of my experimentation with sketchup plugins and study of modern weapon designs. A science fiction gun that fits into my existing designs inspired loosely by the Pancore Jackhammer Automatic Shotgun. Shares multiple design elements with my Advanced weapon line.
NOTE: If feedback is favorable I may design mixed additional weapons on this template.
by
dynath
the product of my experimentation with sketchup plugins and study of modern weapon designs. A science fiction gun that fits into my existing designs inspired loosely by the Famas G2 Commando rifle. Shares multiple design elements with my Advanced weapon line.
NOTE: If feedback is favorable I may design mixed additional weapons on this template.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, talk to the hand, suitable for 28mm sci-fi figured war gaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
I fixed this guy.
A pair of techno-fists doing rude hand jestures, up yours, suitable for 28mm war gaming miniatures. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of mechanical fists suitable for 28mm Wargaming miniatures. Hand is in the open possition. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists doing rude hand jestures, F*** You, suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of technofists in closed hand possition like punching. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists with integrated claws. Hand is in a closed possition. Model has 4 claws. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A pair of techno-fists with integral claws. Hand is closed. 3 Claws in a wolverine style design. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
A pair of techno-fists with integral flame throwers. Hand is in the closed possition. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (Confirmed Printable)
NOTES:
As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
This is a sprue of 5 Techno-Axes suitable for 28mm gaming. Techno-Axe requires pinning to model's existing hand.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Model updated, (confirmed printable)
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, will remain available but not updated.
A sprue of 5 technological halberds suitable for 28mm wargaming. Halberd will require pinning to model's existing hands.
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
Revision History:
V0.0: Model uploaded, (believed not-printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A sprue of 5 technolgical pole arms fiting the basic hooked design of an English bill. Suitable for 28mm wargaming. Some assembly required.
V0.0: model uploaded, (Confirmed printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
V0.0: model uploaded, (Confirmed printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A set of technological pole arms with a chainsaw glaive design. Suitable for 28mm wargaming. Some assembly required.
V0.0: model uploaded (confirmed printable)
V0.0: model uploaded (confirmed printable)
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A set of technological pole arms with a blade like a scalple. Suitable for 28mm wargaming. Some assembly required.
V0.0: model uploaded (confirmed printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
V0.0: model uploaded (confirmed printable)
V1.0: Huge Error, dogs and cats living together, definitively not printable
V2.0: Wow, batting a thousand on this one, give me an hour...
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Scythe shaped techno weapons. these will be revised eventually.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
This is an archived model. It will remain available for purchase but I will not be updating it.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Again can't edit my previous comments. I hope you enjoy these aliens pulse rifles.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A set of 5 Smart Guns, reminiscent of those from the movie Aliens. These heavy weapons are a whopping 36mm in length so be warned. Extra ammo drums included. Suitable for 28mm wargaming. Some assembly required. Requested by the Nefarious Mr. Crow.
V0.0: Model uploaded, (believed printable).
V1.0: Model updated to remove clipping in the STL file resulting in missing faces. (Proven printable.)
V2.0: Model updated to thicken the design, and improve compliance with Detail range of materials (proven printable.)
Note: After seeing my models printed in White Strong and Flexible I've revised my designs so they will hopefully print in the Detail line of products. These new models benefit from beefier structures that are studier, can be printed in more materials, and are more in keeping with the designs for my target gaming audience. These newer models, while more expensive are etter and more sustainale.
WARNING: Tested in WSF, FD, FUD, and TD only.
V0.0: Model uploaded, (believed printable).
V1.0: Model updated to remove clipping in the STL file resulting in missing faces. (Proven printable.)
V2.0: Model updated to thicken the design, and improve compliance with Detail range of materials (proven printable.)
Note: After seeing my models printed in White Strong and Flexible I've revised my designs so they will hopefully print in the Detail line of products. These new models benefit from beefier structures that are studier, can be printed in more materials, and are more in keeping with the designs for my target gaming audience. These newer models, while more expensive are etter and more sustainale.
WARNING: Tested in WSF, FD, FUD, and TD only.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Archived Model, it will remain available for purchase but will no longer be updated.
this is a scaled version of my tonfa design. its been scaled down enough it cuts the price drastically but shouldn't look completely out of place on a 28mm miniature.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
a full sized version of my tonfa design as it was originally intended to be. its scaled off of my heavy armor designs so it may be to larger for smaller models.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A technologically advanced single handed blade that resembles a butchers knife.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A set of techno varients of traditional samurai weapons including Katana, Wakizashi, and Tanto, includes both in and out of scabard.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A curved single handed weapon designed to resemble a meat cleaver.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A big technologically advanced 2 handed mace.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
Chain saw tonfa's awesome ain't it! set of 10, enough to give pairs to a squad of 5.
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A curved bladed single handed weapon reminiscent of a meat cleaver
by
dynath
Check out my blog: http://dynath40k.blogspot.com/
A set of 5 power armor helmets resembling tigers. Designed for standard MALE marine torsos, female varient is coming.
I've been informed they look like Chester Cheetah... I eat to many cheetos I guess.
Requested by the Nefarious Mr. Crow.
Shop Details
Expertise
- 3D modeler
- Artist
Shop Sections
- All Sections
- Aliens
- Angry Marines
- Arms
- Aspecis of Mu
- Dalek Empire
- Female Marines
- Full Figures
- Full Vehicles
- General Armory
- General Gear
- helms
- Legio-Custodes
- Male Marines
- Melee Weapons
- Ranged Weapons
- Realms of Chaos
- Scythes of The Emperor
- Shoulder Pads
- Test Models (caution)
- The Cyber Dead
- the Emperor's Tide
- The Golden Legion
- Upgrade Sprues
