C Westbrook Designs
Designs by cwestbrook
We found 13 products by cwestbrook
by
cwestbrook
This Decorative Victorian Inspired Orb can be used in addition to or instead of a Guest Book.
It comes in white, black, blue, purple, pink or red!
Your Guests write their notes on decorative paper, and then roll them up and insert them into the globe.
It can be opened in a week, a year, or five years, like a wedding time capsule!
Meanwhile (and afterwards!) it can remind you of your special day sitting on your mantle or in your display cabinet.
A subtle surprise detail is suspended within in the form of a double wire heart hanging from an eternity symbol.
When you're ready to take a look at the lovely handwritten sentiments, advice, and wisdom of your friends and family, just clip the two thinnest rods holding the bottom platform and the platform rotates to open!
A special thanks to Bonnie, who while trying to figure out something unique to enter for the Shapeways wedding contest suggested the concept.
It comes in white, black, blue, purple, pink or red!
Your Guests write their notes on decorative paper, and then roll them up and insert them into the globe.
It can be opened in a week, a year, or five years, like a wedding time capsule!
Meanwhile (and afterwards!) it can remind you of your special day sitting on your mantle or in your display cabinet.
A subtle surprise detail is suspended within in the form of a double wire heart hanging from an eternity symbol.
When you're ready to take a look at the lovely handwritten sentiments, advice, and wisdom of your friends and family, just clip the two thinnest rods holding the bottom platform and the platform rotates to open!
A special thanks to Bonnie, who while trying to figure out something unique to enter for the Shapeways wedding contest suggested the concept.
by
cwestbrook
Please read the entire listing before purchase!
This listing is for BLACK, for colors and white go to this listing: http://shpws.me/ngpH
!! ONLY buy the WHITE in this listing if you're going to dye it yourself, the non-polished white is very hard to clean.
Reminiscent of Victorian filigree, this unique Designer iPhone 5 case is a durable, stylish and a more eco friendly alternative to mass produced cases on the market today.
*Please note that I'm keeping the price of this listing lower than my Etsy case listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use for an extended time.*
Take a look at the video (also above) to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Designed by C Westbrook Designs in San Francisco and produced by Shapeways.
This puzzle style case will fit the iPhone 5.
Color options are currently a charcoal-like textured black (unvarnished via this site), polished blue, polished purple, polished red, polished pink and polished white (though keep in mind using a white case every day may get it dirty, with that in mind I have the price lower for white).
The photos of the case in black highlight the unique coral-like texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Since each case is printed individually the texture can vary (scroll through photos above for an example).
I've tried out this 3D print on my iPhone 5 (as pictured), and it fits well. My previous case for my iPhone 4 withstood my abuse very well, the color (after varnishing to protect it) wears much like leather.
I designed it for easy access to all buttons, ports and controls. In the iPhone 5 version of my case I've designed the front to taper down into the screen area so that it's easier to swipe to the edges.
The colors available are what Shapeways currently offers.
*Only the black cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 5 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
*White cases I'm offering in the polished white, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
This listing is for BLACK, for colors and white go to this listing: http://shpws.me/ngpH
!! ONLY buy the WHITE in this listing if you're going to dye it yourself, the non-polished white is very hard to clean.
Reminiscent of Victorian filigree, this unique Designer iPhone 5 case is a durable, stylish and a more eco friendly alternative to mass produced cases on the market today.
*Please note that I'm keeping the price of this listing lower than my Etsy case listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use for an extended time.*
Take a look at the video (also above) to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Designed by C Westbrook Designs in San Francisco and produced by Shapeways.
This puzzle style case will fit the iPhone 5.
Color options are currently a charcoal-like textured black (unvarnished via this site), polished blue, polished purple, polished red, polished pink and polished white (though keep in mind using a white case every day may get it dirty, with that in mind I have the price lower for white).
The photos of the case in black highlight the unique coral-like texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Since each case is printed individually the texture can vary (scroll through photos above for an example).
I've tried out this 3D print on my iPhone 5 (as pictured), and it fits well. My previous case for my iPhone 4 withstood my abuse very well, the color (after varnishing to protect it) wears much like leather.
I designed it for easy access to all buttons, ports and controls. In the iPhone 5 version of my case I've designed the front to taper down into the screen area so that it's easier to swipe to the edges.
The colors available are what Shapeways currently offers.
*Only the black cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 5 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
*White cases I'm offering in the polished white, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing before purchase!
This listing is for COLORS and WHITE, for black go to this listing: http://shpws.me/lY3S
Reminiscent of Victorian filigree, this unique Designer iPhone 5 case is a durable, stylish and a more eco friendly alternative to mass produced cases on the market today.
*Please note that I'm keeping the price of this listing somewhat lower than my Etsy case listings due to less selling fees on Shapeways and since I don't hand varnish these pieces for extra color protection.
I do recommend at least one coat of varnish on colored pieces to keep the color longer. Shapeways new dyeing process does have more durable colors, but it is an item used multiple times a day.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways.
This puzzle style case will fit the iPhone 5.
Color options are currently a charcoal-like textured black (unvarnished via this site), polished blue, polished purple, polished red, polished pink and polished white (though keep in mind using a white case every day may get it dirty, with that in mind I have the price lower for white).
More photos coming soon of the colors once they arrive. Meanwhile I have photos of the case in black. It will be a smoother surface in the polished.
I've tried out this 3D print on my iPhone 5, and it fits well. My previous case for my iPhone 4 withstood my abuse very well, the color (after varnishing to protect it) wears much like leather. If the case is a tidbit loose (as printing tolerances vary) then just put a bit of varnish or glue in the bottom corners and let dry completely.
I designed it for easy access to all buttons, ports and controls. In the iPhone 5 version of my case I've designed the front to taper down into the screen area so that it's easier to swipe to the edges.
The colors available are what Shapeways currently offers.
*Only the black cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 5 prior to shipment.
*White cases are in the polished white, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
This listing is for COLORS and WHITE, for black go to this listing: http://shpws.me/lY3S
Reminiscent of Victorian filigree, this unique Designer iPhone 5 case is a durable, stylish and a more eco friendly alternative to mass produced cases on the market today.
*Please note that I'm keeping the price of this listing somewhat lower than my Etsy case listings due to less selling fees on Shapeways and since I don't hand varnish these pieces for extra color protection.
I do recommend at least one coat of varnish on colored pieces to keep the color longer. Shapeways new dyeing process does have more durable colors, but it is an item used multiple times a day.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways.
This puzzle style case will fit the iPhone 5.
Color options are currently a charcoal-like textured black (unvarnished via this site), polished blue, polished purple, polished red, polished pink and polished white (though keep in mind using a white case every day may get it dirty, with that in mind I have the price lower for white).
More photos coming soon of the colors once they arrive. Meanwhile I have photos of the case in black. It will be a smoother surface in the polished.
I've tried out this 3D print on my iPhone 5, and it fits well. My previous case for my iPhone 4 withstood my abuse very well, the color (after varnishing to protect it) wears much like leather. If the case is a tidbit loose (as printing tolerances vary) then just put a bit of varnish or glue in the bottom corners and let dry completely.
I designed it for easy access to all buttons, ports and controls. In the iPhone 5 version of my case I've designed the front to taper down into the screen area so that it's easier to swipe to the edges.
The colors available are what Shapeways currently offers.
*Only the black cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 5 prior to shipment.
*White cases are in the polished white, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Putting this on hold in most colors due to new polished colors making the case not close as well. Black should work as normal.
A hinged snap case for the newest version of the Square Reader, this Case also fits the previous version which was the first iteration to be sold in stores.
**Please note this case does not come with a keychain attachment (to attach your own you'll also need a jump ring) or a lanyard. Also, there is not an extra color-protective coat of varnish on the piece. If you desire a varnished piece with either a keychain or lanyard attachment order from my shop on Etsy.com:
www.cwestbrookdesigns.etsy.com
Inspired by the fact I kept misplacing my Square Reader when I went to conventions and there weren't many visually pleasing options to fulfill my needs.
Designed with a loop that can attach to a keychain via a jump ring (not included) or attach to a lanyard / neck strap (not included). This one has my decorative Swirl Gear logo, but I'm waiting to see if I can get Square's permission to have their logo on the front as an option. Please note that this version direct from Shapeways doesn't have a coat of varnish to add extra color protection.
Designed by C Westbrook Designs in San Francisco and printed by Shapeways.
3D printing allows the hinge to come fully assembled and functional. It does not come with a keychain or lanyard attachment unless you purchase it off my Etsy shop listing.
This listing links to a video of the case in action (above).
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
A hinged snap case for the newest version of the Square Reader, this Case also fits the previous version which was the first iteration to be sold in stores.
**Please note this case does not come with a keychain attachment (to attach your own you'll also need a jump ring) or a lanyard. Also, there is not an extra color-protective coat of varnish on the piece. If you desire a varnished piece with either a keychain or lanyard attachment order from my shop on Etsy.com:
www.cwestbrookdesigns.etsy.com
Inspired by the fact I kept misplacing my Square Reader when I went to conventions and there weren't many visually pleasing options to fulfill my needs.
Designed with a loop that can attach to a keychain via a jump ring (not included) or attach to a lanyard / neck strap (not included). This one has my decorative Swirl Gear logo, but I'm waiting to see if I can get Square's permission to have their logo on the front as an option. Please note that this version direct from Shapeways doesn't have a coat of varnish to add extra color protection.
Designed by C Westbrook Designs in San Francisco and printed by Shapeways.
3D printing allows the hinge to come fully assembled and functional. It does not come with a keychain or lanyard attachment unless you purchase it off my Etsy shop listing.
This listing links to a video of the case in action (above).
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing. Thank you!
Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing!
Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off.
If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options.
The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case.
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the style and color of each side.
Choose either a swirl or gear motif for each side, then choose your color.
**MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!**
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
Please read the entire listing. Thank you!
Make your designer puzzle style case even more unique by choosing the Style and Color of each side.
Choose either a Swirl or Gear motif for each side, then choose your Color.
**MAKE SURE you choose the design for both the left AND right side for your case and double check which COLOR you want for each!**
Take a look at the photos to see what each design looks like on each side and also to see your color options!
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Make your designer puzzle style case even more unique by choosing the Style and Color of each side.
Choose either a Swirl or Gear motif for each side, then choose your Color.
**MAKE SURE you choose the design for both the left AND right side for your case and double check which COLOR you want for each!**
Take a look at the photos to see what each design looks like on each side and also to see your color options!
Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today.
Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).
This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM)
Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease.
The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip!
*Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*
Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY
Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately.
I designed it for easy access to all buttons, ports and controls.
The colors available are what Shapeways currently offers.
*White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove.
*Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case:
On: http://youtu.be/PEE4IV3JS90
Off: http://youtu.be/qlcGGMVAwIs
*Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive.
To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
This Floral Vine design was inspired by my obsession with Victorian and Steampunk attire. It's one of the most popular designs when I go to Events/Shows/Conventions and I finally put it online!
Matching Earrings here: http://shpws.me/nlpS
Designed by C Westbrook Designs in San Francisco (me!) and fulfilled by Shapeways in New York.
With the introduction of the polished colors I'm able to offer jewelry directly from Shapeways!
The texture is smoother and the color more durable so no post-processing needed! I do however recommend a quick wash with mild soap and water just to get any excess powder off.
This comes in Red, Pink, Blue and Purple! (Black upon request, but that needs some post-processing aka varnish.)
I've kept this listing price a bit lower than my Etsy Shop (www.cwestbrookdesigns.etsy.com) since I don't personally inspect or wash these, and also to supplement the cost of higher US shipping through here.
To avoid any confusion let me clarify that if you buy an item from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
Matching Earrings here: http://shpws.me/nlpS
Designed by C Westbrook Designs in San Francisco (me!) and fulfilled by Shapeways in New York.
With the introduction of the polished colors I'm able to offer jewelry directly from Shapeways!
The texture is smoother and the color more durable so no post-processing needed! I do however recommend a quick wash with mild soap and water just to get any excess powder off.
This comes in Red, Pink, Blue and Purple! (Black upon request, but that needs some post-processing aka varnish.)
I've kept this listing price a bit lower than my Etsy Shop (www.cwestbrookdesigns.etsy.com) since I don't personally inspect or wash these, and also to supplement the cost of higher US shipping through here.
To avoid any confusion let me clarify that if you buy an item from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.
by
cwestbrook
These are the matching earrings to the "Floral Vine Necklace w/ Toggle Clasp in Nylon" I have for sale here: http://shpws.me/mWdH
*PLEASE NOTE that this does not always come with the earring hooks. I'm not positive if Shapeways is still automatically giving those along with earrings. Also note that the black earrings have more of a texture than the colors, and care should be taken to not brush them against fabrics that can snag easily.
Ear wires are sold at most arts and crafts stores and many places online, just make sure the ear hook loop is at least 1.4 mm wide to fit the top of the earring.
ONLY if in the United States you can email me after making your purchase at info at cwestbrook dot com and I'll send you ear wires at no extra charge. Attach proof of purchase (your email receipt from Shapeways) and make sure it doesn't have any personal information except the address you'd like me to send the ear wires too. The ear wires are stainless steel. You'll just need a pair of pliers to open the loop and slide the earring on, then close the loop and it's ready to wear.
*PLEASE NOTE that this does not always come with the earring hooks. I'm not positive if Shapeways is still automatically giving those along with earrings. Also note that the black earrings have more of a texture than the colors, and care should be taken to not brush them against fabrics that can snag easily.
Ear wires are sold at most arts and crafts stores and many places online, just make sure the ear hook loop is at least 1.4 mm wide to fit the top of the earring.
ONLY if in the United States you can email me after making your purchase at info at cwestbrook dot com and I'll send you ear wires at no extra charge. Attach proof of purchase (your email receipt from Shapeways) and make sure it doesn't have any personal information except the address you'd like me to send the ear wires too. The ear wires are stainless steel. You'll just need a pair of pliers to open the loop and slide the earring on, then close the loop and it's ready to wear.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
- Maker
Shop Sections
