cup volume approximately 60ml. Teeth and eyes of snake are not as detailed as in 3D model because of the glazing but they are sufficiently detailed (for my opinion).

This 3D Model ist the missing part of my other model "sphere spiral d16mm" with a sphere diameter of 16mm. The purpose of it is to symbolise two parts, that complement to one another like it should be in a harmonic partnership. This part has to be made from flexible material. The other part "sphere spiral" can be made from a rigid material like silver for example. To mount the filler part just screw it on the spiral. The filler part snaps tightly into the spiral but with a needle like tool you can lift it and screw it off the spiral again.

The shape shall resemble a melting cube. The vase is only for decorative purposes and there is no guarantee that it is water proof (my sample made from glazed ceramics seems to be though) Due to its shape the vase holds a bigger reservoir of water and has a lower centre of gravity than an cylindric shape. Furthermore the "molten foot" adds more stability against toppling over when a longer flower is placed in the vase.

The threefold Celtic knot of the Closed Triad symbolizes the cosmic Wheel of Fortune which keeps on turning and changing forever, but nevertheless always remains in perfect balance. This pattern is said to harmonize body, mind and spirit. Furthermore it inspires feelings of love and affection and protect its wearer from harm.

The threefold Celtic knot of the Closed Triad symbolizes the cosmic Wheel of Fortune which keeps on turning and changing forever, but nevertheless always remains in perfect balance. This pattern is said to harmonize body, mind and spirit. Furthermore it inspires feelings of love and affection and protect its wearer from harm.

This 3D Model should be paired to build a complete spheric shape with an outer diameter of 16mm. Such completed you can thread it on a leather or rubber string an wear it as a pendant. You can choose 2 different materials and snap them onto each other. Be aware that at least one of the parts should be a flexible material. I am not sure yet if two rigid parts can be snapped on each other.

This 3D model of a tiny octopus can be assembled to a necklace or bracelet. At the head of the octopus you can find 2 dimples where you can snap 2 arms of another octopus on. The distance of dimple and snapfit is 24mm. With 9 or more octopusses you can assemble a bracelet in the colours you like or with 20 or more you can build a necklace. As a solitair you can run in a string with max. diameter of 1.8mm through the arm loops and wear it as a pendant. Should look nice when made in silver.

Candle holder to put in the center of vase

The Decisionmaker! If you don't feel to make a decision on your own you can consult this tool. It consists of the "rail cage", an "locking ball" and the "decisive ball". If the decisive ball drops in one of the tubes to the inner sphere, the locking ball - wich is trapped inside the inner sphere - blocks the direct way to the other side. So the decisive ball will seek another way out where it runs in one of the decision baskets. If the basket shows "Y" it means Yes and - guess the other letter!

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.

Sphelo is a word creation derived from "spheric loops". The loop sculptures are developed from a shape similar to a Moebius band. The loops are building two spheric shapes with which several parts can be snap fitted into each other. The sphelos have a smaller shape on one side and a bigger on the other. There are sphere shapes with - diameters inner / outer: 16 / 20mm and 20 / 24mm, - diameter 12 / 16mm and 8 / 12mm, - diameter 12 / 16mm and 16 / 20mm, In addition there are several plugs and balls / spheres to combine with the sphelos. You can snap parts with same diameter ratio with each other or combine parts with different sizes. To build a closed necklace there are 2 possibilities: 1) you need sphelos with the same diameter ratio, one side is designed to fit into the other. 2) if you snap a small 8/12 // 12/16mm sphelo in a 16/20 // 20/24mm sphelo you need at least 1 sphelo 12/16 // 16/20mm to adapt from the small sphelo to the bigger sphelo. The sphelos with inner ball shape of 16mm can be supplemented with a glass marble or other sphere with diameter 16mm. I have designed some spheric shapes with 16mm diameter you can obtain from my shop. Most of the parts have a hole with diameter 3mm inside. With this you can build your own combination and thread a string through the sphelos on which you can put your own pearls or things you like.