Aviator RC

Designs by ICU

ICU is selling 17 products in Airplane section

by ICU
Now V2.5.1!There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.Do you love...
 
(1)  
  •  
From: $8.75
 
by ICU
Spinner for the UMX Sbach 342 designed to work with the GWS line of props.  Now Version 2.1.  The side of the spinner that comes in conta...
 
(5)  
  •  
From: $5.00
 
by ICU
Now V2.5.1!There was an occasional failure to print, approx 1 out of every 8 were rejected for thin walls. The problem has been fixed.Do you love ...
 
(0)  
  •  
From: $8.75
 
by ICU
Spinner for the UMX Beast designed to work with the GWS line of props.  Now Version 2.1.  The side of the spinner that comes in contact ...
 
(0)  
  •  
From: $5.75
 
by ICU
Reliably cut extra SFG's for your UMX Sbach.  Now V2.0, I increased the length of the LOW PROFILE SFG.  It now has almost the same s...
 
(0)  
  •  
From: $15.00
 
by ICU
A small Anemometer to measure the wind speeds while at the field flying.  Spinning cup arm assy. Dia. is 3 15/16"(10cm).D.I.Y. instructio...
 
(9)  
  •  
From: $23.93
 
by ICU
**Orders made before 9/1/11 may require a small amount of sanding.  Message me for details**This is a "Beefy" version of the propell...
 
(0)  
  •  
From: $3.00
 
by ICU
**All pictures shown are of the "Lite" version mounts.  These mounts are exactly the same, except without the window.**Comes with 4 ...
 
(0)  
  •  
From: $8.00
 
by ICU
Comes with 4 mounts, enough to hang 2 small to medium planes.  Or possibly up to 4 planes, if they are hung from the prop or landing gear.&nb...
 
(0)  
  •  
From: $13.75
 
by ICU
Profile-style wheel pants for your UM or UMX plane.  For the UMX Beast, UMX Sbach, UMX Extra 300, UM 4-Site, and UM Pole Cat.Tired of breaking...
 
(0)  
  •  
From: $5.00
 
by ICU
Comes with 4 mounts, enough to hang 2 small planes.  Or possibly up to 4 planes, if they are hung from the prop or landing gear.  (up to ...
 
(0)  
  •  
From: $7.50
 
by ICU
**Orders made before 9/1/11 may require a small amount of sanding.  Message me for details**This is a "Beefy" version of the propell...
 
(0)  
  •  
From: $4.50
 
by ICU
Optional weather vane for use with the D.I.Y. mind meter.Assembly instructions comming soon.
 
(0)  
  •  
From: $5.25
 
by ICU
Gimbals for the "Pinch-Style"  flier.Designed to be used with Spektrum/JR transmitters. I recommend running a M4 tap thru the gimbal...
 
(0)  
  •  
From: $5.75
 
by ICU
Gimbals for the "Pinch-Style"  flier.Designed to be used with Spektrum/JR transmitters. I recommend running a M4 tap thru the gimbal...
 
(0)  
  •  
From: $5.25
 
by ICU
Gimbals for the "Thumb-Style"  flier.Designed to be used with Spektrum/JR transmitters. I recommend running a M4 tap thru the gimbal...
 
(0)  
  •  
From: $9.25
 
by ICU
Gimbals for the "Thumb-Style"  flier. Designed to be used with Spektrum/JR transmitters. I recommend running a M4 tap thru the gimb...
 
(0)  
  •  
From: $7.75
 
Shop Details
Specializing in parts for Ultra Micro and the Ultra Micro Extreme line of planes. And other small parts and accessories for micro sized planes and helicopters.