Version 5.0

“The Obliterator cannon is huge. Not just in terms of its physical size, but its focused fusion core warheads can penetrate the most hardened of bunker walls through sheer overwhelming levels of energy. Even though most commanders are competent enough to wield this monster of a weapon, only the most power hungry, egomaniacal generals choose the Obliterator as their signature weapon. It is as if no other weapon can provide them the rush of pure power that the Obliterator does.

It is even rumoured that some legendary warriors harness the dark matter from dying stars to boost their cannons to unimaginable levels of power, enabling them to destroy planetoids with a single hit. As with most rumours, claims of these capabilities are unsubstantiated.”

This is the 'Lite' version of the Atomic Obliterator, which means the internal structures supporting LED installation has been removed. This also allows for easier assembly as the entire accessory is separable into a mere 2 sections. Two handle pieces have been provided per set, and they can be mounted on sockets located front and rear of the cannon. An additional ‘fusion pistol’ is also included to round up the entire set.

The Obliterator is 10.8 cm long.

The regular version of the Atomic Obliterator can be found here.

Version 2.0

“As the flight technologies of the enemy grew more advanced, so has our missile guidance systems. The Quadricore Explodator employs high speed, thermoexplodite concussion warheads with intelligent energy seeking sensors that can take down all but the most skilled of fliers. The ominous shadow of a nightmarish threat has been reduced to something more manageable.”

The Explodator can be separated into 2 pieces: A ‘fist missile’ launcher and a quad barrel heavy blaster! Both elements have a 3mm rail on the side for customization.

The assembled Explodator is 5.4 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 2.0

“None but the mightiest soldiers are able to wield the Cosmic Defenestrator. Originally designed for anti-flier defenses on orbital space stations, the Defenestrator has seen action in all theatres of war. This is very much due to the massive firepower it can bring to bear on its enemies. Its special recoil-absorbing tri-barrel system ensures a insanely high rate of fire of high-calibre shells while preventing the arms of the gunner from being sheared off by the massive forces involved.

Particular flier squadrons made it their modus operandi to load up on magazines of oxidizate shells, achieve altitude and let loose with a relentless cloud of metal eating projectiles. Even with the horrific consequences we have witnessed, no soldier was ever caught and tried for war crimes.”

The Cosmic Defenestrator comes with a main handle that can be mounted in 2 positions, as well as an auxiliary handle on a balljoint. This second handle can be clipped onto any 3mm rail, and can be used to offer additional support for the Defenestrator’s weight. Also, this set comes with a laser sight accessory.

The Defenestrator is 10.9 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 1.0

A compact variant of the Quadricore Explodator, the Implodators are most suitable for mounting on vehicular forms and for smaller figures. They make great auxiliary weapons! They are held by the use of a 5mm peg, and each one has a 3mm rail on its side.

This set consists of a mirrored pair of Implodators. Each one is 3 cm long.
This model is tested successfully on White Strong Flexible.

Version 1.0

"Scouts all over the galaxy swear by their trusty Anlace. Even though its energy output is tiny for a melee weapon, its silent activation, low energy signature and its ability to deal damage where it counts has gained it plenty of supporters. Many a soldier rue the day they underestimated the Anlace, rubbing their cauterized stumps thoughtfully."

This is Part A of the Aucepic Anlace model consisting of the hilt. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.
Or click here for Part B (Energized variant).

Version 1.0

This is Part B of the Aucepic Anlace model. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 1.0

"The Cybersonic Scimitar has found its way into the hands of many a space pirate, and for good reason. It is a crude, brutal design, cheaply made and engineered to bring the most hurt into a small wound signature. The grating whine it emits while activated did not help much to improve its image."

This is Part A of the Cybersonic Scimitar model consisting of the hilt. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.
Or click here for Part B (Energized variant).

Version 1.0

This is Part B of the Cybersonic Scimitar model. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 2.0

"The Verger is not designed to maim nor dismember, but to deliver a powerful energy charge on impact that overloads the circuitry of the target, often leaving them as inarticulate, dribbling bodies with the occasional delayed spasm. This effective tool of control is popular with scientists and explorers who have need of pristine, undamaged sample lifeforms."

This is Part A of the Voltech Verger model consisting of the outer casing, handle and pommel pieces. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.

Version 2.0

This is Part B of the Voltech Verger model which consists of the central core. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 2.0

This is Part B of the Betrabludger model consisting of the central spiked core. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 2.0

"Talk about portable artillery! Wham! These Sledgeslammer babies are so packed with power that one KaBlam! hit is enough to kill everything they touch! Leaving only a Shizzle! Shizzle! smokin' crater... I don't know what those brains in Research put into these things, but I wish I can get two of them! One for each Whammo! fist!"

This is Part A of the Seismite Sledgeslammer model consisting of the handle, 2 hammerhead frames and pommel piece. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.

Version 1.0

"The Piezopernach is an interesting device. In a rare design quirk for a melee weapon, it incorporates a kineto-voltic cyclotron within its casing. What that serves to do is to absorb, store and enhance all forms of kinetic input it receives and channels the resultant charge into the tips of its penetritic spikes. Any hapless target that gets into contact with those said spikes are in for a nasty shock. The amount of energy that can be stored in this weapon is immense; nearly 100 kilotons can be delivered in one hit, enough to power a respectable earthquake."

This is Part A of the Piezopernach model consisting of the weapon and pommel pieces. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.
Or click here for Part B Energized.

Version 1.0

This is Part B of the Piezopernach model consisting the hammerhead core. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 2.0

"When the ground pounders bring out their Galactic Dichotomizers you know they mean serious business. These massive axes can only be wielded by the largest of their foot soldiers, and whether be it a plank, flank or tank, nothing can withstand the blows on the Dichotomizer; everything shatters to pieces in one or two nuclearic charged hits."

This is Part A of the Galactic Dichotomizer model consisting of the axe head frame, handle and pommel pieces. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been tested in White Strong Flexible and Frosted Ultra Detail.

Click here for Part B.
Or click here for Part B Energized.

Version 2.0

This is Part B of the Galactic Dichotomizer model consisting the both sides of the axe blades. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

Version 1.0 has been successfully tested in Frosted Ultra Detail but Version 2.0 remains untested.

Click here for Part A.

Version 2.0

"A perennial favourite of the cruel. It is not enough that this Cleaver boasts a monomolecular edge that guarantees a skyscraper be split in half in one swing. No. The Craniocleaver has to go and overdo it by incorporating a hyperthruster on its rear that allows its wielder to deliver blows fifty times more effectively; fifty times more than required to hew sinew from sinew. Fifty times more than needed to crack head cases open."

This is Part A of the Craniocleaver model consisting of the weapon and pommel pieces. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been successfully tested in White Strong Flexible.

Click here for Part B.
Or click here for Part B Energized.

Version 2.0

This is Part B of the Craniocleaver model consisting the axe blade and combat spike. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 1.0

"Sometimes even the most brutal of combatants need to exhibit a bit of finesse. When the massive MegaMace proves too slow and cumbersome, gladiators may choose to unleash the MegaBludgeon instead. This weapon is compact and maneuverable, but its furonic generator artificially boosts its mass by a factor of 500%, giving it as much punch as its larger cousin. The largest brutes can be felled in a single blow from this tiny package."

This is Part A of the MegaBludgeon model consisting of the 4 mace head frame pieces, 2 handle pieces and one pommel piece. Printing in Strong Flexible material recommended.

The handle is 5mm peg compatible.

This model has been succesfully tested in White Strong Flexible.

Click here for Part B.

Version 1.0

This is Part B of the MegaBludgeon model consisting the mace spiked core. Printing in Transparent Detail, Frosted Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in Frosted Ultra Detail.

Click here for Part A.

Version 2.0

This mace comes in two parts which you have to order separately from Shapeways. This is part A, consisting of the handle pieces and connector. Printing in Strong Flexible is recommended.
Link to Part B.

Version 2.0

This mace comes in two parts which you have to order separately from Shapeways. This is part B, consisting of the blades and attack spike. Printing in Transparent Detail or Frosted Ultra Detail is recommended.

Link to Megamace Part A.
Link to MegaFlail Part A.

Version 2.0

This is Part B of the Gyroguillotine model consisting of the blade piece. Printing in Transparent Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.

Click here for Part A.

Version 2.0

This is Part B of the Gyroguillotine model consisting of the blade piece with an 'energized' texture. Printing in Transparent Detail or Frosted Ultra Detail is recommended.

This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.

Click here for Part A.