Ariel's Customs
Designs by fakebusker83
fakebusker83 is selling 89 products in Weapon accessories section
by
fakebusker83
Version 1.0
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
Version 1.6
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
fakebusker83
A pair of wrists, hands and add-on accessories for the ROTF voyager Starscream figure! Every finger is posable on ball joints, and the wrists are double-jointed for maximum posability!
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
Version 1.0
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
Here I present the weapon set for DOTM deluxe Starscream! I was actually in my head for a couple of days thinking of a satisfying, involving way of portraying Starscream's weapons in bot mode, yet a tidy way of keeping them in jet mode.
by
fakebusker83
Version 1.5
This is a set of weapons designed to be used with Dark of the Moon voyager Sentinel Prime figure! Each set includes a pair of swords, a hand blaster and a shield. The swords and blaster can be stored at the back of the shield, which in turn can be stored at the back of the figure or on top of its alt mode!
All the weapons and shield are held by 5mm pegs, so they are compatible with many other figures.
This set is tested on White Strong Flexible.
This is a set of weapons designed to be used with Dark of the Moon voyager Sentinel Prime figure! Each set includes a pair of swords, a hand blaster and a shield. The swords and blaster can be stored at the back of the shield, which in turn can be stored at the back of the figure or on top of its alt mode!
All the weapons and shield are held by 5mm pegs, so they are compatible with many other figures.
This set is tested on White Strong Flexible.
by
fakebusker83
Version 1.5
This blaster is an enlarged version of the one included in the voyager Sentinel Prime weapon set, this time sized to fit the leader class Sentinel Prime figure!
Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.
This model is untested.
Includes a 3mm c-clip to allow storage on Sentinel's many 3mm railings.
This model is untested.
by
fakebusker83
Version 1.5
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
Edit: Tightened hand peg. Hopefully it fits voyager Megatron better now.
A weapon accessory for the Dark of the Moon voyager Megatron figure! The handle is a 5mm peg modified to fit into his hands.
Includes 2 auxiliary pegs on the side for storage purposes.
A larger version can be found here.
This model is tested in WSF.
by
fakebusker83
Version 1.5
Edit: Tightened hand peg, similar to original version.
An enlarged version of the "Feuer Frei" scatter blaster, now lengthened to 13 cm to better fit leader class figures. The handle is still a 5mm compatible peg.
There are still 2 auxiliary pegs on the side for storage, as well as areas where 3mm c-clips can attach to.
This model is untested.
Edit: Tightened hand peg, similar to original version.
An enlarged version of the "Feuer Frei" scatter blaster, now lengthened to 13 cm to better fit leader class figures. The handle is still a 5mm compatible peg.
There are still 2 auxiliary pegs on the side for storage, as well as areas where 3mm c-clips can attach to.
This model is untested.
by
fakebusker83
Version 1.5
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
Edit: Thickened front spikes for greater endurance and strength.
A vicious, spiky hand cannon to arm your alien robotic ground troops with! Made to be as accurate to the movie footage as possible, this design contains hoses, armour plates and other features that cannot be easily replicated with conventional molding techniques.
Printing in Strong Flexible is recommended due to the amount of fine, fragile details.
This model is tested in WSF.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
Shop Sections
