Ariel's Customs
Designs by fakebusker83
fakebusker83 is selling 44 products in Add-ons section
by
fakebusker83
Version 1.0
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
by
fakebusker83
Version 2.0
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
by
fakebusker83
Version 1.0
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
Version 1.0
This is the Aqua variant of the Crossfire hands design which features large spike which slides on to the back coverplates. These hands are fully posable; all fingers and thumbs are double jointed. The wrist connects to the forearm via a 5mm port.
Length is 36mm from wrist to tip, 24mm across the knuckles.
This variant is untested. Strong Flexible material is recommended.
This is the Aqua variant of the Crossfire hands design which features large spike which slides on to the back coverplates. These hands are fully posable; all fingers and thumbs are double jointed. The wrist connects to the forearm via a 5mm port.
Length is 36mm from wrist to tip, 24mm across the knuckles.
This variant is untested. Strong Flexible material is recommended.
by
fakebusker83
Just added: a photo of an awesome leader Starscream custom using these hands, done by my good friend Encline!
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
A pair of wrists, hands and add-on accessories for the ROTF voyager Starscream figure! Every finger is posable on ball joints, and the wrists are double-jointed for maximum posability!
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
These hands can collapse neatly in jet mode for a more satisfying, streamlined appearance. Additionally, the add-on weapons can be mounted on the underwing hardpoints. There are so many ways to customise this set!
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
by
fakebusker83
Version 2.5
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
A design for DOTM Megatron's right hand built to be used for DOTM leader Sentinel Prime figure! This hand design is made famous by Limewire's custom leader class DOTM Megatron and is now made available to you!
by
fakebusker83
Version 2.0
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
Yup, here's my first offering for upgrading your DOTM figures! There has been many awesome customs of Sentinel Prime lately, and you'll only need a couple of expressive, posable fists to make them complete!
by
fakebusker83
Version 1.0
Edit: The world famous Transformers customizer Encline has put up a review of this pair of Optimus Prime's hands! In the video he shows the assembly process, installation, and he finally showcases how well the hands worked, holding weapons and giving various poses! Again, I am very honoured to have my designs reviewed in such an awesome manner. Link is located below!
A pair of hands for ROTF Leader class Optimus Prime! These hands are fully articulated with ball joints on the fingers, thumbs and wrists! Also, they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended material: Strong Flexible
Edit: The world famous Transformers customizer Encline has put up a review of this pair of Optimus Prime's hands! In the video he shows the assembly process, installation, and he finally showcases how well the hands worked, holding weapons and giving various poses! Again, I am very honoured to have my designs reviewed in such an awesome manner. Link is located below!
A pair of hands for ROTF Leader class Optimus Prime! These hands are fully articulated with ball joints on the fingers, thumbs and wrists! Also, they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended material: Strong Flexible
by
fakebusker83
Version 2.0
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
This is an update for the pair of hands I did for ROTF Leader class Optimus Prime. Much time has been invested in making them look as movie accurate as possible. These hands, like their predecessors, are fully articulated with ball joints on the fingers, thumbs and wrists and they are capable of holding 5mm peg mechtech weapons as well as his original rifle!
Recommended materials: Strong Flexible
by
fakebusker83
Version 1.5
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
A pair of posable hands for use with the ROTF leader Optimus Prime figure! The wrists, thumbs and all fingers are ball-jointed. Additionally, the back of each hand unfolds to form a deadly knuckle duster!
This design is recommended in Strong Flexible material.
TFW Radicon thread here.
Flickr gallery here.
by
fakebusker83
In response to requests from friends and supporters, I did a revised version of my posable hands for the DOTM leader Sentinel Prime figure, this time to be much more movie accurate and with even more detail!
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
Each hand is articulated at the wrist with a ball joint. The fingers each are double jointed, and even the thumbs are on ball joints. The leader's hands are big enough for me to design it such that it can hold weapons without relying on the tension of the finger joints, so you can pose them in many different ways, with many different weapons. Transformation is very much possible, I made sure of that (yay!). Just make sure the fingers are arranged properly, kinda similar to how the original fingers were. IssuesThe test sample has a loose wrist ball-joint. This issue is not fixed as I used the same measurements as my other hands. Those hands came out with tight joints so it beats me why this sample was loose. Use super glue to tighten if necessary. As the joints are all designed to be sturdy and the pieces are kinda chunky, I will not recommend ordering them in Detail material or Frosted Ultra Detail material as they will most likely break under that pressure. However, I still will make these materials available for those who are picky about their surface detail. Buyer beware!
TFW2005 thread here. (Includes assembly instructions)
Flickr gallery here.
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
Shop Sections
