3 spare fingers (the middle section) for your posable MP Seeker hands. I did this as that piece is the most fragile of the model, prone to snapping at the joint if you are not careful during assembly. This only applies for Frosted Ultra Detail.

I am not earning any profit from this. I just want everybody to have a perfect set of hands. Oh, and the MP Seeker hand model already includes 2 spare finger pieces. This model is for the extreme emergency.

Version 2.0

This set is specially designed for the War for Cybertron deluxe Megatron figure! It consists of a pair of forearms and a vambrace which are fully capable of working with the figure's transformation and they look great in both robot and vehicle modes!

These hands have individually posable fingers and thumbs, and are capable of holding compatible 5mm peg accessories.

This set is also compatible with the Atomic Obliterator .


Radicon thread here.

Flickr gallery here.

Version 1.5

This is a pair of giant sized posable hands meant for any of your large, combiner or city-former scaled projects! These hands are extremely posable, with each digit segmented into 3 joints and capable of creating almost every conceivable pose!

The wrist is a ball joint socket, and it works with any 10 mm diameter ball joint. This includes LEGO® Bionicle ball joints. You can also get a compatible wrist adaptor from Shapeways here.

The hands each measure 68 mm from wrist to fingertip, and 40 mm across the knuckles.

This model is successfully tested in White Strong Flexible.

Flickr gallery here.
TFW2005.com thread here.

Version 1.0

A compatible wrist ball joint adaptor for the Extremely Enormous Extremities posable hands sets.
The ball joint diameter is 10 mm.

Flickr gallery here.
TFW2005.com thread here.

Version 2.0

THIS VERSION IS UNTESTED. TEST PRICES AVAILABLE. ORDER AT YOUR OWN RISK.

This is the "Corvus" head for the TFP: Prime RID deluxe Vehicon figure! This head comes in three components which includes the face piece, light pipe and goggle attachments. Yes, this head comes with goggles!

Some flexing is required to mount the goggles onto the head. Take care during assembly not to over-flex.

Version 1.0 has been tested in Frosted Ultra Detail and experienced some fit issues. Version 2.0 is fixed but untested. Frosted Ultra Detail is recommended.

Version 2.0

THIS VERSION IS UNTESTED. TEST PRICES AVAILABLE. ORDER AT YOUR OWN RISK.

This is the "Chet" head for the TFP: Prime RID deluxe Vehicon figure! This head comes in three components which includes the face piece, light pipe and posable lower jaw.

Some flexing is require to mount the lower jaw onto the head. Take care during assembly not to over-flex.

Version 1.0 has been tested in Frosted Ultra Detail and experienced some fit issues. Version 2.0 is fixed but untested. Frosted Ultra Detail is recommended.

Version 1.0

A pair of Sickles favoured for use by the D.R.E.A.D team. Each Sickle has a vertical and horizontal 5mm peg for different mounting methods, and measures 73 mm from handle to blade.

This model is successfully tested in White Strong Flexible.

Version 1.0

This is a Spiker blaster favoured for use by the D.R.E.A.D team. It is held by a 5mm peg handle. This model has been successfully tested in White, Strong Flexible.

Version 1.0

A pair of Suppressor minigun accessories favoured for use by the D.R.E.A.D team! Each Suppressor is highly detailed and comes with a 360º swivel arm that allows it to act as a personnel mounted turret! The swivel attaches to any compatible 5mm port.

Each Suppressor comes in 3 components including the barrel assembly, main casing and swivel arm. Some assembly is required.

This model is successfully tested in White Strong Flexible and that material is recommended. For those who want only one Suppressor, you can get the left one here and the right one here.

Version 1.0

This is a set of components to form 6 'dreadacles' of 30 units each. In total this set contains:
- 6 x 3mm peg unit
- 6 x 3mm port unit
- 168 x basic dreadacle units
- 6 x cyber-kunai

The main dreadacle segment attaches together via balljoints, and the cyber-kunai pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.

Equally distributed, the length of each dreadacle is about 16 cm.

For their intended usage, it is recommended to get the D.R.E.A.D 6X3 Backpack model as well.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.

This model has been successfully tested in Strong Flexible.

Version 1.2

A piece to replace the back piece/trunk of the TF: Prime RID deluxe Vehicon figure. This upgrade will give the Vehicon two extra 5mm ports and one 3mm port on his back to mount additional accessories.

In car mode, the ports will resemble aggressive looking rocket boosters!

This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.

Version 1.0

A piece to replace the back piece/trunk of the TF: Prime RID deluxe Vehicon figure. This upgrade will give the Vehicon six extra 3mm ports on his back to mount additional accessories.

In car mode, the 6 ports will resemble aggressive looking rocket boosters!

This model has been successfully tested in White Strong Flexible and Frosted Ultra Detail.

Version 2.0

A pair of forearm "Spider Stinger" blades and hand blasters for TF: Prime RID deluxe Arcee! These are extremely show accurate in terms of size and detail. Both the blasters and blades can be mounted on the foot pedals and the front 5mm peg holes in bike mode.

The blades contain sharp edges and small parts, not suitable for children.

The blades have been successfully tested in White Strong Flexible and Frosted Ultra Detail.
Version 2.0 blasters are successfully tested in White Strong Flexible.


Click here to order only the blasters.

Version 2.0

A pair of show accurate blasters for TF: Prime RID deluxe Arcee! These blasters are held by 5mm pegs, and they also have side peg holes for them to be mounted on the side of her bike mode!

This set is for those who have already owned the previously released "Spider Stinger" blades, and wanted just the blasters.

Version 1.0 is tested in White Strong Flexible. The current version 2.0 is untested.
Buyer beware.

Version 1.6: Fixed thin wall issue on missile fins.

This is a set to upgrade the Transformers Prime deluxe (FE) Starscream figure! It contains a blaster, 2 triple missile launchers, 2 single missile launchers, 2 knee spikes, and 1 head spike.

You can find installation instructions at my TFW2005.com thread.

Version 2.0

A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.

Of course, the blades use 5mm peg handles, so they are compatible with most figures.

If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.

This model is tested in Frosted Ultra Detail.

Flickr gallery here.

TFW2005 thread here.

Version 2.0

A pair of show-accurate blades and replacement smokestacks for the Transformers Prime First Edition voyager Optimus Prime figure! These are meant to replace the soft versions the original figure came with, and are not meant to be toys or given to children.
This variant of the original uses the peg system to enable the blades to rotate, at a slight cost of visual accuracy.

Also like the original, the blades use 5mm peg handles, so they are compatible with most figures.

If you own the RID voyager mold and wish to order only the swords without smokestacks, click here.

This model is tested in Frosted Ultra Detail.

Flickr gallery here.

TFW2005 thread here.

Version 2.0

A pair of mighty, tri-barreled blaster accessories for TF: Prime RID deluxe Cliffjumper! These are inspired by their appearance in the animated series, and offers a great compromise between playability and show-accuracy!

Version 2.0 has been successfully tested in White Strong Flexible.

TFW2005.com thread here.

Flickr gallery here.

Version 1.0

A replacement head for the Generations War for Cybertron deluxe Cliffjumper figure! The model comes in 2 pieces; a head piece and a light pipe piece. Simply pop the latter into the back of the head piece and attach the whole thing to the figure's neck ball joint. No screws or adhesives needed.

This model is successfully tested on Frosted Ultra Detail.

Version 3.0

Contains a pair of blasters and a grenade!
This model is tested successfully on White Strong Flexible.

This latest version has a re-reworked grenade that fits (even?) better in Wheeljack's bot and alt modes.

TFW2005 thread here.

Flickr gallery here.

Version 2.5

Note: This version is the PORTED SET. The back fillers have 1 5mm peg hole each.

This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.

The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. As this is the ported version, there is one extra 5mm peg hole on each back filler for weapon storage.

The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.

This set is successfully tested in White Strong Flexible.
For the non-ported version with extra 5mm peg holes, click here.

TFW2005 thread here.

Version 1.5

This is a Minigun weapon accessory for TF: Prime Powerizer Skyquake!
Made to look accurate to its show appearance, this Minigun features movable rear and forward handles for maximum adaptability in posing, and the 8 barrels rotate as well!
At the side there is an auxiliary 5mm peg for use in storage on the figure's back.

The Minigun measures 126 mm in length.
This set also comes with 2 bombs.

This model has been successfully tested in White Strong and Flexible.

TFW2005.com thread here.
Flickr set here.