Ariel's Customs
Designs by fakebusker83
We found 138 products by fakebusker83
by
fakebusker83
Version 1.0
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
This is a pair of articulated hands for the FOC voyager Soundwave figure! Every digit is articulated and the thumb is on a ball joint. The hands have a wrist swivel joint and is designed to easily replace the originals.
This design is modified from the previously designed 14mm posable fists, and functions similarly. These hands will fit the FOC Soundblaster and FOC Blaster figures as well.
This model has not been tested. Strong Flexible material is recommended.
by
fakebusker83
Version 2.0
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!
Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.
This model is successfully tested in Black Strong Flexible and that material is recommended.
by
fakebusker83
Version 1.0
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
This is a small set of components to form 2 'dreadacles' of 27 units each. In total this set contains:
- 2 x 3mm peg unit
- 2 x 3mm port unit
- 50 x basic dreadacle units
- 1 x cyber-kunai
- 1 x gripper claw
The main dreadacle segment attaches together via balljoints, and the cyber-kunai and gripper claw pegs into a 3mm port at one end. The other end of the dreadacle is a 3mm peg which can be used on all compatible ports. Feel free to alter the length of each dreadacle to your taste.
The gripper claw works on all 3mm diameter pegs.
For length extension, you can look at the D.R.E.A.D Dreadacle 120 unit booster pack.
This model has been successfully tested in Strong Flexible.
by
fakebusker83
Version 1.6
This is the Thugmeister, a tiny humanoid robot that stands about 2 inches tall. He is sturdy and very posable. His fists can hold 3mm peg compatible accessories and he comes with 2 hand blaster weapons.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for "Fierier" variant Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
This is the Thugmeister, a tiny humanoid robot that stands about 2 inches tall. He is sturdy and very posable. His fists can hold 3mm peg compatible accessories and he comes with 2 hand blaster weapons.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for "Fierier" variant Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6
This is the "Fierier" variant of the Thugmeister. Apart from his smirkish expression, he is the same as his Thugmeister brothers; a little robot standing 2 inches tall. In addition to his default pair of hand blaster weapons, he comes with 2 Driller and 1 Zapper accessories.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for the regular Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
This is the "Fierier" variant of the Thugmeister. Apart from his smirkish expression, he is the same as his Thugmeister brothers; a little robot standing 2 inches tall. In addition to his default pair of hand blaster weapons, he comes with 2 Driller and 1 Zapper accessories.
By some odd quirk, he can fold up into a rough, disc-like shape...
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Click here for the regular Thugmeister.
Click here for the Thugmeister KaBlammers.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.6
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.
Some assembly is required.
Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 4.0
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
A little robotic figure that transforms into a cyber cassette that fits nicely into the deluxe War for Cybertron Soundwave figure! It also has an alternate rocket launcher mode that can be mounted on any 5mm peg hole.
It comes with 2 cannon/piledriver accessories.
You can also arm the Thugger with either Driller or Slammer accessories!
Radicon thread here.
Flickr gallery here.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 1.0
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
A variant of the Thugger Slammer, each order contains 2 piston pieces and 2 Driller bits. Each piece has connection ports which allows ultimate customisability!
You can mount the Driller bit on the Thugger's forearm, or assemble the piston and Driller bit together to form a massive Driller accessory!
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Just added: a photo of an awesome leader Starscream custom using these hands, done by my good friend Encline!
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
Note: I have tested these hands in both Strong Flexible and Detail material, and I conclude SF is the better alternative as it is much hardier and is able to stand up to the wear and tear of the joints. Detail material is disappointingly unable to do so, and the joints are too loose for comfort. For better surface detail, I highly recommend ordering the hands in White Strong Flexible Polished!
A pair of posable hands for the Revenge of the Fallen Leader Starscream figure!
Each order comes with 2 hands with interchangeable core, giving customizers the freedom to mount the core with a 5mm socket to allow arming of compatible weapons, or the lack of a socket for an aesthetically pleasing appearance.
Each hand possesses 3 posable fingers on ball-joints, bending in 2 places, and 2 thumbs also mounted on ball joints.
The wrist too, is on a ball joint, allowing for dynamic poses on a already awesome figure.
Due to the nature of the installation, this model is for experienced customizers only. You need a dremel, cutting knife and a strong epoxy sculpt. These are for removing the existing hands and installing the wrist ball-joints in their place.
Flickr set is here.
TFW2005 thread is here. (Includes assembly instructions)
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
- Artist
Shop Sections
