Many Angled Studios
Designs by artfulshrapnel
We found 27 products by artfulshrapnel
by
artfulshrapnel
Krablor is a pendant styled after a Japanese Spider Crab (wikilink).
It is intended to be worn with a small chain or string, which can be looped through his claws without the need of jump rings or other hardware.
by
artfulshrapnel
Floral skull pendant/brooch. Needs backing or a jump ring attached. (I didn't want to include anything that would make it less versatile)
by
artfulshrapnel
A small pendant featuring anglerfish and octopus tentacles.
by
artfulshrapnel
The ocean's many-armed ballerina as a pendant. A design by our artist Violet Kirk, intended to hang by a chain or rope inserted between the upper arms.
by
artfulshrapnel
The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
by
artfulshrapnel
The worst ear plug the internet has to offer. Use this model for gauges from 4 gauge to 00 gauge (5-10mm). Includes a slightly raised rim for a snug fit. For this version, it can be modified to fit any size as low as 4 gauge, after that the hands just won't really fit. If anyone has very small gauges and wants a special version feel free to contact me, I'm sure we can come up with something that works for you!
To Clarify: These earplugs are sold individually, not in pairs!
by
artfulshrapnel
This is my "Happy Skull" d6 design. It is 24mm on each side (just under 1"), so it is a bit oversized vs. a normal d6 dice. A more standard sized 17mm version is available here: http://www.shapeways.com/model/211715/happy_skull_d6_17mm.html?gid=ug37365 I recommend ordering that one if you're going to print in metal, since i couldn't get this one down to what I consider an "affordable cost" in that medium.
The dice is, despite appearances, reasonably well balanced. Odd numbered sides are opposed by the next-largest even number, and have a single double-thick tooth to help counter-balance the weight of the extra tooth on the even side. Also, each side is rotated 180 degrees from its opposing face. This should put the center of gravity at or very close to the center of the dice, making for a nice, fair roll.
The dice is, despite appearances, reasonably well balanced. Odd numbered sides are opposed by the next-largest even number, and have a single double-thick tooth to help counter-balance the weight of the extra tooth on the even side. Also, each side is rotated 180 degrees from its opposing face. This should put the center of gravity at or very close to the center of the dice, making for a nice, fair roll.
by
artfulshrapnel
This is a standard-size version of my Happy Skull d6. Best used in games like Warhammer, Shadowrun, and FATE where a 6 truly is the happiest possible result. The giant 1" version is here: http://www.shapeways.com/model/211616/happy_skull_die_1_.html?gid=ug37365
The dice is, despite appearances, reasonably well balanced. Odd numbered sides are opposed by the next-largest even number, and have a single double-thick tooth to help counter-balance the weight of the extra tooth on the even side. Also, each side is rotated 180 degrees from its opposing face. This should put the center of gravity at or very close to the center of the dice, making for a nice, fair roll.
The dice is, despite appearances, reasonably well balanced. Odd numbered sides are opposed by the next-largest even number, and have a single double-thick tooth to help counter-balance the weight of the extra tooth on the even side. Also, each side is rotated 180 degrees from its opposing face. This should put the center of gravity at or very close to the center of the dice, making for a nice, fair roll.
by
artfulshrapnel
Bloody Tongue Aspect of Nyarlathotep, from the Call of Cthulhu game the the Cthulhu Mythos.
The model is 3" (7.5cm) tall, and except for a hollow in the torso (to make the teeth look more menacing) is solid and weighted towards the bottom. It should be very sturdy and stable for use in a roleplaying game or for display.
Using most game stats I've been able to find, this version is approximately to scale with standard DnD minis.
As for materials, I recommend Alumide for the smooth finish, or Black Strong & Flexible. If you want to go super fancy, I imagine he would look quite nice in Black Glass or Antique Bronze Glossy,
The model is 3" (7.5cm) tall, and except for a hollow in the torso (to make the teeth look more menacing) is solid and weighted towards the bottom. It should be very sturdy and stable for use in a roleplaying game or for display.
Using most game stats I've been able to find, this version is approximately to scale with standard DnD minis.
As for materials, I recommend Alumide for the smooth finish, or Black Strong & Flexible. If you want to go super fancy, I imagine he would look quite nice in Black Glass or Antique Bronze Glossy,
by
artfulshrapnel
You Stay. No following.
Fungi from Yuggoth, from the Cthulhu Mythos. Buglike aliens that fly about abducting people.
Fungi from Yuggoth, from the Cthulhu Mythos. Buglike aliens that fly about abducting people.
by
artfulshrapnel
A winged centipede from an in-development RPG called "ireta". In the real (fake) world, they are up to 50 meters long and can destroy sailing ships. This one is slightly smaller.
Just arrived in the mail today as WSF. Ended up being much sturdier than expected and holds up well. The antennae are a little bendy, but don't break easily. It can stand as intended on some of the bottom wings, but I think it looks best supported as if flying. Detail on the head is good. The eyes are a little less raised than I'd hoped, but the tiny teeth are well formd and the chitinous ridges are crisp and clear. If intending to use as a display model perhaps WD would be a better medium.
Will post actual pictures as soon as I have a nice place to photograph.
Just arrived in the mail today as WSF. Ended up being much sturdier than expected and holds up well. The antennae are a little bendy, but don't break easily. It can stand as intended on some of the bottom wings, but I think it looks best supported as if flying. Detail on the head is good. The eyes are a little less raised than I'd hoped, but the tiny teeth are well formd and the chitinous ridges are crisp and clear. If intending to use as a display model perhaps WD would be a better medium.
Will post actual pictures as soon as I have a nice place to photograph.
by
artfulshrapnel
Maybe just a good Yithian. Well, he's alright. This particular one is kinda a jerk.
A member of the Great Race of Yith, from Lovecraft's writings. To scale with most gaming miniatues. 2.5" or 20 approximately 20 feet in height. The base is hollowed to reduce cost, and has a single 2.5mm round escape hole on the bottom that is easily plugged or filled.
I highly recommend Black Detail if you're going to paint this up, the texture is far superior and all the limbs should be more than thick enough to avoid breakage. (the thinnest point, just behind the claw, is about 2mm thick)
If you have interest in a larger version, just let me know and I'll create a scaled up model. It will need to be at least 50% larger to accomdate printing in metal or glass.
A member of the Great Race of Yith, from Lovecraft's writings. To scale with most gaming miniatues. 2.5" or 20 approximately 20 feet in height. The base is hollowed to reduce cost, and has a single 2.5mm round escape hole on the bottom that is easily plugged or filled.
I highly recommend Black Detail if you're going to paint this up, the texture is far superior and all the limbs should be more than thick enough to avoid breakage. (the thinnest point, just behind the claw, is about 2mm thick)
If you have interest in a larger version, just let me know and I'll create a scaled up model. It will need to be at least 50% larger to accomdate printing in metal or glass.
by
artfulshrapnel
Bloody Tongue Aspect of Nyarlathotep, from the Call of Cthulhu game the the Cthulhu Mythos.
The model is 4.5" (11cm) tall, and except for a hollow in the torso (to make the teeh look more menacing) is solid and weighted towards the bottom. It should be very sturdy and stable for use in a roleplaying game or for display.
The model is 4.5" (11cm) tall, and except for a hollow in the torso (to make the teeh look more menacing) is solid and weighted towards the bottom. It should be very sturdy and stable for use in a roleplaying game or for display.
by
artfulshrapnel
This model is about 2" tall, and hollow to make it affordable. The walls are approximately 1-1.5mm thick depending on area.
My intent is to fill the model with resin or polyurethane foam, a much cheaper option. (the solid build cost about $30 in WS&F plastic)
If anyone wants to purchase the solid version, I'll upload it on request. Just don't want anyone buying it by accident when there's a cheaper option available.
My intent is to fill the model with resin or polyurethane foam, a much cheaper option. (the solid build cost about $30 in WS&F plastic)
If anyone wants to purchase the solid version, I'll upload it on request. Just don't want anyone buying it by accident when there's a cheaper option available.
by
artfulshrapnel
A small hover drone sized for 24mm miniature or war games. Model features an under-mounted laser or marker rifle and control fins, large lens array at the front of the model, and communications antenna.
A hole will need to be drilled, or the model glued to some sort of stand. Since aesthetics may dictate a different placement based on preference, I left this model without a specific location for mounting such a base.
A hole will need to be drilled, or the model glued to some sort of stand. Since aesthetics may dictate a different placement based on preference, I left this model without a specific location for mounting such a base.
by
artfulshrapnel
A hovering shield robot, with eyes all around to spot incoming fire and a shield projector underneath. Let them hammer away at your shields, this guy has your back. Great for miniature sci-fi games or war games.
Sized for 24mm miniature games, stands a bit taller than a 24mm human figure. There is a hole in the bottom to accommodate a flying base or other stand, though it may need a bit of drilling out due to printing limitations.
Sized for 24mm miniature games, stands a bit taller than a 24mm human figure. There is a hole in the bottom to accommodate a flying base or other stand, though it may need a bit of drilling out due to printing limitations.
by
artfulshrapnel
Exactly the same as my smaller Nyarlethotep models, but a full 17cm in height.
by
artfulshrapnel
A horrifying land squid from the stars. These monstrous creatures burrow beneath the surface of the earth, and wreak havoc when they breach the surface!
by
artfulshrapnel
A piece designed to fit the Crane "Drop Shape" Cool Mist Humidifier. With this in place, it resembles an egg from a certain movie about aliens. Turn the humidifier on and smoke will boil out the top. You can shoot green lasers through it, or just look at it really closely through your space helmet.
The smile on your face will make you want to give this thing a big hug once you see the final effect.
NOTE: Some Drop humifiers may be about 2-4mm wider, causing this to be a tiny bit too small. The best solution it to use a small amount of epoxy or other material to bulk up the rim of the print so it rests comfortably on top of your humidifier.
The smile on your face will make you want to give this thing a big hug once you see the final effect.
NOTE: Some Drop humifiers may be about 2-4mm wider, causing this to be a tiny bit too small. The best solution it to use a small amount of epoxy or other material to bulk up the rim of the print so it rests comfortably on top of your humidifier.
by
artfulshrapnel
A steampunk and victorian inspired nautical pendant featuring a variety of unusual deep sea fish. Want something a little more unique than sharks, dolphins, and mermaids? How abut some viperfish and nautilus?
Shop Details
Shop Sections
