Belt Buckle set inspired by Tali Vas Normandy from the Mass Effect Series.

ATTENTION:The buckles in the pic has been painted and connected to belts. The Shapeways parts will NOT.
The buckles will be solid white or silver without any belts/straps.

Back buckle swivel parts attach together with a paper clip

Main buckles slip over and 2" belt
Swivel fits a 1.5" strap/belt

Like a leaf on the wind.....

Pendant/Keychain inspired by the Wanderer's scarf from the video game Journey produced by That Game Company

ATTENTION: The Pendant in the main pic was printed in sliver. It was then distressed with black paint and has a ball chain and connector added. The part you receive from Shapeways will NOT. It will be one solid color. You will need to do your own distressing and add your choice chain and connectors.
Video Painting/Distressing Instructions

Protoype was printed in Gold Glossy. Then the tops and the edge details were lightly sanded to remove the gold coating revealing the stainless steel base material. Then it was then distress with black paint.

Want more than one? - Save money and get the Earring Set instead

Pendant inspired by the ammo surrogate from the Mass Effect series

ATTENTION: The Pendant in the main pic has been distressed with black paint and has a ball chain and connector added. The pendant you receive from Shapeways will look like the part in the "Silver Glossy" picture. You will need to distress, paint and add a connector and chin to your pendant.

Video Distressing Instructions
>

Earring (or Pendant/Keychain) Set inspired by the Wanderer's scarf from the video game Journey produced by That Game Company

ATTENTION: The parts in the pics were printed in Silver. They were then distressed with black paint. The parts you receive from Shapeways will NOT be distressed. They will be one solid color. You will need to do your own distressing and add your choice of earring loops/attachment
Video Painting/Distressing Instructions

Protoype was printed in Gold Glossy. Then the tops and the edge details were lightly sanded to remove the gold coating revealing the stainless steel base material and then distress with black paint.


Only want one? - Save money and get the Pendant instead

Ring based on Portal 2 GLaDOS.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Ring based on Portal 2 Potato GLaDOS.

US Sizes 6-12
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Two Part Ring based on Portal 2 GLaDOS.

SIZE 6

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black

Click for Size 6.5 White
Click for Size 6.5 Black

Click for Size 7 White
Click for Size 7 Black

Click for Size 7.5 White
Click for Size 7.5 Black

Click for Size 8 White
Click for Size 8 Black

Click for Size 8.5 White
Click for Size 8.5 Black

Click for Size 9 White
Click for Size 9 Black

Click for Size 9.5 White
Click for Size 9.5 Black

Click for Size 10 White
Click for Size 10 Black

Click for Size 10.5 White
Click for Size 10.5 Black

Click for Size 11 White
Click for Size 11 Black

Click for Size 11.5 White
Click for Size 11.5 Black

Click for Size 12 White
Click for Size 12 Black

Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.

NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.

The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.

US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Ring based on Portal 2 Wheatley

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Ring based on Portal 2 Rick Adventure Core

US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Ring based on Portal 2 "Fact"

US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Kit turns a Puzzle Cube into a Portal Companion Cube Puzzle

NOTE: This is just the white parts of the kit. Also buy Portal Puzzle KIt (1\2) for the whole set of parts


Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )

--Attach Corner parts using Super Glue

--Attach Edge parts using Super Glue (centering edges between corner parts)

--Attach Center parts using Super Glue (centering them in center square)

--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)

--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.



Thanks for your order and commitment to nerd culture!

Kit turns a Puzzle Cube into a Portal Companion Cube Puzzle

NOTE: This is just the black hoop parts of the kit. Also buy Portal Puzzle KIt (2\2) for the whole set of parts


Instructions:
--Paint a Circle of Color on Each Side of Your Puzzle Cube (circle should be same size as black hoop part )

--Attach Corner parts using Super Glue

--Attach Edge parts using Super Glue (centering edges between corner parts)

--Attach Center parts using Super Glue (centering them in center square)

--Attach Black Hoop Parts using Super Glue (Center Parts with Edge Parts (Glue 100% of part to Cube or Hoops will fall off after next step)

--Carefully Dremel or Sand the Hoop Parts into 9 Sections Along Puzzle Cube Lines To Free the Puzzle Cube for Spinning/Solving\Un-Solving.



Thanks for your order and commitment to nerd culture!

Ring based on Assassin's Creed Apple of Eden

US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.

Vambrace rotates to reveal hidden blade design on band.

US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia

The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide

Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12

Smaller, Solid Pendant based on Assassin's Creed Apple of Eden

3mm Hole thru center for your own chain/necklace

Parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Ring based on Daft Punk Guy-Manuel de Homem-Christo Helmet

US Sizes 6-12 (in Half Sizes)
NOTE: Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia

The rings in the pic/video have been detail painted by hand. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide

Click Personalize to choose options and to add to cart.


Thanks for your order and commitment to nerd culture!

Ring inspired by Garrus Vakarian's visor from Mass Effect 2

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Ring inspired by Thermal Clips and N7 from the Mass Effect universe

SIZE 6

Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12

Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia

ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide


Thanks for your order and commitment to nerd culture!

Pendant (or earring) inspired by my favorite quarian engineer Tali'zorah Vas Normandy from the Mass Effect universe (BioWare)

ATTENTION:The parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.


Silver Detail Process:
Masked off frame with painter’s tape
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines

Transparent Detail Process:
Dyed entire part with Purple RIT Fabric Dye (Dyeing Guide)
Painted the frame with Silver (Americana Gloss Enamels)
Painted entire part with 2 thin coats of Black Transparent Glass Paint for detail lines and to darken the purple (Americana Crystal Gloss Enamels)
Loyality Gold sections done with careful application of Rub 'N Buff

Steel/Alumide Detail Process:
Masked off frame with painter’s tape
Spray painted silver base coat on “Lens” section
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines

General Detailing Guide


Thanks for your order and commitment to nerd culture!

Replica inspired by the Mass Effect series

ATTENTION:The dog tag in the pics has been covered in foil tape, distressed with black paint and has a ball chain and connector added. The Shapeways parts will NOT.
They will be solid black without a chain or connectors.

Foil tape, black paint and ball chains can be purchased at local hardware and craft stores or via Amazon.