Click and drag to rotate
N-scale quench locomotive (RIGHT-hand version) 3d printed Prototype, ready for operation except for the couplers that I forgot to order... The wires to the quench car will be for extra power pickup as the 2-axled Tomix powertruck isn't the best runner. The prototype revealed fitment problems with the stairs whic

DIGITAL PREVIEW
Not a Photo

Prototype, ready for operation except for the couplers that I forgot to order... The wires to the quench car will be for extra power pickup as the 2-axled Tomix powertruck isn't the best runner. The prototype revealed fitment problems with the stairs whic
N-scale quench locomotive (RIGHT-hand version) 3d printed Prototype, ready for operation except for the couplers that I forgot to order... The wires to the quench car will be for extra power pickup as the 2-axled Tomix powertruck isn't the best runner. The prototype revealed fitment problems with the stairs whic
N-scale quench locomotive (RIGHT-hand version) 3d printed Prototype, ready for operation except for the couplers that I forgot to order... The wires to the quench car will be for extra power pickup as the 2-axled Tomix powertruck isn't the best runner. The prototype revealed fitment problems with the stairs whic

DIGITAL PREVIEW
Not a Photo

N-scale quench locomotive (RIGHT-hand version) 3d printed This model is for applications where the quench car is to the RIGHT of the locomotive as shown.
N-scale quench locomotive (RIGHT-hand version) 3d printed This model is for applications where the quench car is to the RIGHT of the locomotive as shown.

DIGITAL PREVIEW
Not a Photo

N-scale quench locomotive (RIGHT-hand version)

Made by
Print With Shapeways
Choose Your Material
$39.53
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is a bodyshell for a locomotive to fit the quench car. There are two versions available, depending if the quench tower is located to the right or the left of the coke ovens. This version is for the quench tower to be located to the RIGHT when looking at the coke side of the ovens.

The model runs on a modified Kato/Tomix #11-103 power truck which must be trimmed down to fit the shell. I trimmed mine to be a snug fit.

In addition the shell is designed for handrails from TrainCat (their N-scale walkway and handrails kit) and the shell features guide holes to assist drilling for the stanchions. The industrial stairs are from Gold Medal Models. Test fit the stairs before painting as the bottom may need trimming in order to stay above rail level.

The shell is designed for Micro-Trains 1015 couplers and there are guide holes for drilling. Be VERY careful when drilling and tapping the holes as the drill/tap will break through the front if drilled more than a few mm deep. Drill very carefully and stop immediately if you see signs of it breaking through.

Lastly it is possibly to install window glazing by cuttting clear plastic to size and glue to the inside of the shell. In the end opposite the quench car is also a dual headlight that can be lit by a light source inside the shell.
Details
What's in the box:
N-scale quench locomotive (RIGHT-hand version)
Dimensions:
3.12 x 5.38 x 3.33 cm
Switch to inches
1.23 x 2.12 x 1.31 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.