AJModels P01 Ivatt N1 Saturated Boiler, BR-era
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$120.77
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
00-gauge ex-GNR/LNER Ivatt N1 0-6-2 tank engine body only. The locomotive has been modelled on a British Railways-era saturated boiler example no. 69434. In the era modelled this locomotive had had most of its condensing equipment removed.
This body has been designed to fit a Hornby/Dapol/Mainline/Airfix Gresley N2 chassis. Some minor modifications will be required.
To complete you will need: a Gresley N2 motorised chassis (Hornby/Dapol/Mainline or Airfix), handrail knobs and wire, whistle, safety valves, smokebox door dart. You will also need to fashion steps from thin styrene sheet. The model will also need to be prepared, painted and transfers applied. Cosmetic non-working buffers are included on a seperate sprue but these can be substituted for sprung brass versions (available from Alan Gibson) if preferred.
Full instructions can be found here: AJModels
REVISION NOTES:
1) the 3 guide prongs on the top of the bunker (to help make the coal rails) have now been removed as they served no useful purpose (09/01/13)
2) a cut out has been created in the back of the cab to accommodate the Hornby motor position (25/03/13)
3) forward screw mounting position widened to improve strength (03/07/13)
This body has been designed to fit a Hornby/Dapol/Mainline/Airfix Gresley N2 chassis. Some minor modifications will be required.
To complete you will need: a Gresley N2 motorised chassis (Hornby/Dapol/Mainline or Airfix), handrail knobs and wire, whistle, safety valves, smokebox door dart. You will also need to fashion steps from thin styrene sheet. The model will also need to be prepared, painted and transfers applied. Cosmetic non-working buffers are included on a seperate sprue but these can be substituted for sprung brass versions (available from Alan Gibson) if preferred.
Full instructions can be found here: AJModels
REVISION NOTES:
1) the 3 guide prongs on the top of the bunker (to help make the coal rails) have now been removed as they served no useful purpose (09/01/13)
2) a cut out has been created in the back of the cab to accommodate the Hornby motor position (25/03/13)
3) forward screw mounting position widened to improve strength (03/07/13)
Details
What's in the box:
AJModels P01 Ivatt N1 Saturated Boiler, BR-era
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
