YT1300 DEAGO CABIN WALLS
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$55.52
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Falcon cabin walls for the DeAgo kit
This is the biggest upgrade I've launched for the DeAgo Falcon.
I've designed a complete cabin cockpit to replace the stock one, and these are two main parts.
On this product you will receive two -2- cabin walls, upperwall with built in overhead controls and the back wall.
ATTENTION!: these walls are longer than the stock parts, that are wrong, so you will need to make more room, as I've explained.
These walls have the size to fit inside the cabin tube, but you will have to trim a little bit the rounded tab of the tube of the DeAgo Falcon. The height of the back wall with the upper wall at the back side is about 71,5 mm.
This upgrade it's a very close replica from the cabin walls seen on the studio filming model from ESB. They have all the little details; and you can find also the overhead controls at the top of the cabin.
I've designed on them more than 330 pre drilled holes, to allow fiber optics lighting -0.25 mm-.
This product has been designed to fit the cabin cockpit and cabin cone that you can find in this shop. These walls are not intended to be installed with the standard cockpit of the DeAgo kit.
You can find the cockpit and cabin cone that fit these cabin walls on these links:
Millennium DeAgo cabin cockpit
Millennium DeAgo cabin cone
ATTENTION: If you want a translucent part you must order it in Clear Ultra Fine material.
If you order from Europe, this product will be printed in Europe, on the Netherlands, so don't worry for high shipping costs or customs fees.
Attention: if you want clear parts you need to buy the Clear Ultra Fine material.
Product updated on July 2023.
This is the biggest upgrade I've launched for the DeAgo Falcon.
I've designed a complete cabin cockpit to replace the stock one, and these are two main parts.
On this product you will receive two -2- cabin walls, upperwall with built in overhead controls and the back wall.
ATTENTION!: these walls are longer than the stock parts, that are wrong, so you will need to make more room, as I've explained.
These walls have the size to fit inside the cabin tube, but you will have to trim a little bit the rounded tab of the tube of the DeAgo Falcon. The height of the back wall with the upper wall at the back side is about 71,5 mm.
This upgrade it's a very close replica from the cabin walls seen on the studio filming model from ESB. They have all the little details; and you can find also the overhead controls at the top of the cabin.
I've designed on them more than 330 pre drilled holes, to allow fiber optics lighting -0.25 mm-.
This product has been designed to fit the cabin cockpit and cabin cone that you can find in this shop. These walls are not intended to be installed with the standard cockpit of the DeAgo kit.
You can find the cockpit and cabin cone that fit these cabin walls on these links:
Millennium DeAgo cabin cockpit
Millennium DeAgo cabin cone
ATTENTION: If you want a translucent part you must order it in Clear Ultra Fine material.
If you order from Europe, this product will be printed in Europe, on the Netherlands, so don't worry for high shipping costs or customs fees.
Attention: if you want clear parts you need to buy the Clear Ultra Fine material.
Product updated on July 2023.
Details
What's in the box:
YT1300 DEAGO CABIN WALLS
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$53.75
$65.79
