Final design for a mount to fit primarily into a CANA or HANA enclosure to secure and hold a DNA 40 chip from Evolv. But should work easily well in any box mod. Intended to be glued or fixed with double sided tape to base of enclosure and have the board screwed onto it after sliding the display into the preformed groove on the underside. Use of a section of High density foam of 1mm thickness and suitable length is recommended in the screen channel to perfectly position the screen to suit your enclosures screen cut-out when fitting. Holes are preformed to accept the recommended M1.6 screws for mounting and to allow self tapping - tested but I recommend Size 0 screws with 1.5mm thread diameter and about 6-7mm length for best fit and no overhang on the edges. ====== Evolv kindly provided a 3D Model of the chip and I lowered the floor of the regulator area just for a little extra clearance to be on the safe side.. Version 1 still fine. Now out of beta for all versions! Thanks to all the testers!!