Milwaukee 6021-21 Fixed Pulley Retrofit

by dieselox Visit Shop

Milwaukee 6021-21 Fixed Pulley Retrofit 3d printed
Milwaukee 6021-21 Fixed Pulley Retrofit 3d printed
Milwaukee 6021-21 Fixed Pulley Retrofit 3d printed

Not a Photo

3d Model Viewer
Not For Sale

About this Product

6021-21 Random Orbital Sander Pad Brake Retrofit Fixed Pulley requires modification to existing pad brake and belt from Porter Cable 333, available online. This pulley replaces one of the mounting features of the existing pad brake. After removing pad, remove lower housing (4 torx screws) and remove pad brake. Notice attachment tabs on back of "brake". With utility knife, cut out one tab, making a slightly larger rectangular hole in the pad, so the t in the fixed pulley fits through. Install original brake and fixed pulley into slots in sander housing. Re assemble housing. After installing both pulleys, install belt over pulleys. Cut off any remaining original brake fins for clearance. Reinstall sanding pad and check for proper operation. Belt should provide brake action while allowing the pad to rotate slowly when engaged with work piece.
What's in the Box

Milwaukee 6021-21 Fixed Pulley Retrofit in White Strong & Flexible
Width Height Depth
1.2 cm 0.92 cm 1.2 cm
This model is 3D Printed in White Strong & Flexible: White nylon plastic with a matte finish and slight grainy feel.
Last updated on 07/01/2013

Sign In or Join to comment.
Not For Sale


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.