Gen. Siren (G1 Version) Chestplate

Clip-on chestplate for use with Generations Nightbeat (or the exclusive GoShooter figure), to give the figure a chest based on G1 Siren's chest.

The kit will work with both the stock figure and my own "height increase" kit (sold separately), and the two items are kept independent so you can use one without having to buy the other if money's tight!

To apply the chestplate:

Slot the clips at the top over the top of the stock figure's chest, then push the peg on the back of the chestplate into the notch at the bottom of the chest. When removing the chestplate (it needs to come off for transformation), pull forward at the bottom, first.

Note:

This item does not include the original toy, which is shown in the pics for illustrative purposes only.

Also, due to the way the polishing process works, the chestplate may sit a little loosely on the stock figure's chest. This is easily fixed by simply bending down the clips at the top of the chestplate, so they grip better; for extra security, you can also thicken the peg at the bottom of the chest, slightly (using superglue, nail varnish, or a thin sliver of card glued on, along the top edge of the peg).

Tested and recommended in Blue Strong & Flexible Polished.