About this Product
This is the motorframe of the mic. Its the mountingpiece for the ribbon and magnets. And the audio trafo plus the XLR connector.
To build the microphone you must order the next parts, Part 1 the motorframe, Part 2 the capsule, Part 3 the stelframe and 2 times Part 4 the ribbonplates. These parts ar all 3D printed parts. For making the microphone work you need to a couple of more parts. They are, 2 magnets, 1.8 micron alluminium foil, audiotrafo ( we use the trafo's from BeyerDynamics), a piece of thin copperplate, 1 Neutrik male XLR connector and a couple of 2 and 3 mm nuts and bolds plus some wire. You can look for these parts yourselve our order them at firstname.lastname@example.org. If you need detaild instructions, have a question please send us a email. We are working hard to finisch our website so you can find all the info there.
What's in the Box
Ribbonmicrophone Part 1 the Motorframe
in Metallic Plastic
This model is 3D Printed in Metallic Plastic: Grey nylon plastic with a subtle metallic sparkle (formerly Alumide.)
Last updated on 10/21/2013