Science points counter for 7 Wonders.
The wheels allow to calculate Science points at the end of the game: rotate the wheels clockwise according to the number of cards/series you own, then flip the counter to see the corresponding points on the back.
Each wheel has an indexing system (spring) to hold its position.
Overall dimensions once assembled are 84mm wide, 21.3mm high, 7.4mm thick (3.31" w, 0.84" h, 0.29" thk).
6 parts on a sprue.
The counter requires assembly: Cut off all the sprue wires and follow the instructions of the step-by-step pic in the image gallery above.
This is easy, but if you don't think you'll be able to do it, please don't buy this model!!
The model comes unpainted. It has a single uniform colour.
If you want to paint a White Strong Flexible model, some prep info before priming & painting:
I recommend to wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry overnight.
Note:
- Due to SLS manufacturing tolerances, the parts can be more or less easy to snap in place & rotate, depending on the manufacturing batch.
If you get this counter and feel the adjustment of the parts is really too loose or too tight, please send me a message.
- When you cut the sprue on the green model, a tiny white dot will appear where you've cutted. This white dot can be visible, or not, depends. It can be easily corrected by using a permanent pen on the dots.
I've also made a 7W military counter:
https://www.shapeways.com/product/76YK4PQ86/