This is the d3wey Custom FPV Undertray for the DJI Phantom. It is designed around the Fatshark Predator V2 kit but can be used for other kits (please check measurements).
The tray is fitted to the Phantom via "4 x M3 25mm Brass Hex Spacers" (not included). They can be sourced from Ebay for about £2 - £3.
The spacers replace the inner screw on each of the Phantom's landing legs. The tray then sits on the spacers and the original M3 leg screws are used to attach the tray to the spacers.
The TX slides into the custom slot and is fixed in place with the supplied door which can either be sealed with small nuts/bolts (not supplied) or string/wire.
The internal dimensions of the TX holder are:
- Width: 27mm
- Height: 13mm
- Depth: 56mm
This listing is for the Undertray only... the photo also shows the GoPro 'Framish' and Fatshark Filter Housing mounted - both available in the shop
*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.
- d3wey -