DJI Phantom Custom FPV Undertray -Fatshark (d3wey)

DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Overview - this side will not be visible when fitted
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Overview - this side will not be visible when fitted
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Support struts and backbone keep it strong but light
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Support struts and backbone keep it strong but light
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed TX Holder fully integrated (cannot be removed)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed TX Holder fully integrated (cannot be removed)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Door is used to stop the TX from coming out
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Door is used to stop the TX from coming out
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed TX slides in
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed TX slides in
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Door fitted
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Door fitted
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed The structure is thick and tough despite being very light (22 grams)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed The structure is thick and tough despite being very light (22 grams)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Cables are routed through the back
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Cables are routed through the back
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Up and Under cable tidy keeps cables neat
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Up and Under cable tidy keeps cables neat
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Shown here wit the d3wey Fatshark Filter Housing attached
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Shown here wit the d3wey Fatshark Filter Housing attached
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Shown with d3wey battery cage, filter housing and "Frame'ish" around the GoPro. This is a dual battery setup
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Shown with d3wey battery cage, filter housing and "Frame'ish" around the GoPro. This is a dual battery setup
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed FPV Undertray shown in flight
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed FPV Undertray shown in flight
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed FPV Undertray shown in flight
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed FPV Undertray shown in flight
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed 4 x Male to Female 25mm Hex Spacers are used to fix it in place (not supplied)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed 4 x Male to Female 25mm Hex Spacers are used to fix it in place (not supplied)
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Spacers replace the inner screw on each leg
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed Spacers replace the inner screw on each leg
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed The original screw can then be used to secure the tray
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed The original screw can then be used to secure the tray
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
Digital Preview

Not a Photo

DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
DJI Phantom Custom FPV Undertray -Fatshark (d3wey) 3d printed
Digital Preview

Not a Photo

3d Model Viewer

About this Product

This is the d3wey Custom FPV Undertray for the DJI Phantom. It is designed around the Fatshark Predator V2 kit but can be used for other kits (please check measurements).

The tray is fitted to the Phantom via "4 x M3 25mm Brass Hex Spacers" (not included). They can be sourced from Ebay for about £2 - £3.

The spacers replace the inner screw on each of the Phantom's landing legs. The tray then sits on the spacers and the original M3 leg screws are used to attach the tray to the spacers.

The TX slides into the custom slot and is fixed in place with the supplied door which can either be sealed with small nuts/bolts (not supplied) or string/wire.

The internal dimensions of the TX holder are:

  • Width: 27mm
  • Height: 13mm
  • Depth: 56mm

This listing is for the Undertray only... the photo also shows the GoPro 'Framish' and Fatshark Filter Housing mounted - both available in the shop

*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.

- d3wey -

Dimensions

IN: 6.732 w x 0.748 d x 4.134 h
CM: 17.1 w x 1.9 d x 10.5 h
Sign In or Join to comment.
 
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.