Slotcar racing Chassis 1:32 scale -update - EVO II

Evolution model of the 1:32 Chassis
Changes:
-Improved Engine fixing
-extended clearance for pick up travel
-improved front axle -more clearance for pick up travel and click in function for standart bushings (like the ones from slot.it or fly)
-improved clips for fixing the car body ( one piece instead of two)

Otherwise as the old version:
universal chassis for 1:32 scale slotcar racing.

flexible mounted pickup keeps car on track as some 1:24 racers have it.
You will need a small rubberband for the pickup frame (like on the picture)
- fit standard Motors by slot it, carrera or similar. Kables on motor on top. For different motors, manual modifications or glue to the chassis may be needed .

 Suited for Slot.it sidewinder rear axles and bearings, should also work with parts from Fly or similar -some work might be necessary 

For front axle now for Slot.it or Fly bushings (brass or plastic should clip in as on rear).

 different pickups should work

car bodies of Slot it, Fly or any plastic Model in 1:32 can be used

 Car body is fixed by brackets left and right. Attach brackets to car body ( maybe shortening is necessary),

then attach car body. If in correct position, glue car body to brackets . 

The body with the brackets should now clip on and of the chassis ( if cut to correct length).

Due to tolerances in the printing process manual modification can be necessary, depending on the chosen material.

My prototype runs as replacement chassis in a Fly car. Some sanding was needed at some parts, the (non standard) engine needed some additional fixing in this case.
I used a Slot.it rear axle 19 mm and the Fly front axle. Prefer bigger tires, like for the Ford GT40 from Fly
The Interieur does not fit anymore as it was, needs quite some modification.
 -Of  course, the racecar, motor and wheels on the picture are NOT part of the printed items-