You must be logged in and verified to contact the designer.
Product Description
Final design for a mount to fit primarily into a CANA or HANA enclosure to secure and hold a DNA 40 chip from Evolv. But will work easily well in ANY box mod.
Intended to be glued or fixed with double sided tape to base of enclosure or indeed screwed through Mounting holes - and have the board screwed onto it after sliding the display into the preformed groove on the underside. Use of a section of High density foam of 1mm thickness and suitable length is recommended in the screen channel to perfectly position the screen to suit your enclosures screen cut-out when fitting if necessary.
Holes are preformed to accept the recommended M1.6 screws for mounting and to allow self tapping - tested but I recommend Size 0 screws with 1.5mm thread diameter and about 6-7mm length for best fit and no overhang on the edges.
======
This version accommodates Evolv's New Large Screen Version of their chip.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: