White Natural Versatile Plastic
Animatronic Crow (Low Pose)
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$258.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
To build the crow you would require.
2x m3x25mm bolts
(bolt the wings on)
3x Hs311 servos
(neck and center wing control)
5x Hs65hb servos
(Tail, beak, head rotate, each wing)
You need some steel rod (1-2mm) to link the servos for the tail and wings.
The neck is controlled using cables from two of the Hs311 servos. I used 1mm steel wire and Bowden cable. (Bike brake cable)
To hook them up to the servo you can order these or engineer your own.
You would require:
2x http://shpws.me/Ejec
2x http://shpws.me/H2Ao
2x m3x25mm bolts
(bolt the wings on)
3x Hs311 servos
(neck and center wing control)
5x Hs65hb servos
(Tail, beak, head rotate, each wing)
You need some steel rod (1-2mm) to link the servos for the tail and wings.
The neck is controlled using cables from two of the Hs311 servos. I used 1mm steel wire and Bowden cable. (Bike brake cable)
To hook them up to the servo you can order these or engineer your own.
You would require:
2x http://shpws.me/Ejec
2x http://shpws.me/H2Ao
Details
What's in the box:
Animatronic Crow (Low Pose)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
