The ModSledz 3D Printed DNA 200 holder provides a platform to mount and provide a clean installation in the Alpinetech G+ or B DNA 200 box. Will need 3 #0-80 small pattern nuts and 3/16 length #0-80 screws to mount the board securely with captive #0-80 nuts to the holder and then epoxy the holder into the box. No alignment is necessary with a pre cut enclosure as the holder has been dimensioned to align the buttons and USB port. The captive hex nuts allow the board to be removed from an enclosure if repair becomes necessary.
The V1 will work with onboard buttons with a 2mm flange thickness (DEFAULT FOR ALPINETECH G+ IS NOW 1.5MM). The select buttons can have a maximum flange diameter of 6mm and the fire button with a flange diameter of 10mm. The holder will also work with an off board fire button setup.