Only Hours Left! Get 15% off your own designs 3D printed in our most popular materials! · Learn More

(X1) Pitch Control Lever

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever installed on transmitter
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever colors (coral red, white, royal blue) impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever colors (coral red, white, royal blue) impression
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever overview
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever Section view
(X1) Pitch Control Lever 3d printed (X1) Pitch Control Lever Section view
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

(X1) Pitch Control Lever 3d printed
(X1) Pitch Control Lever 3d printed
Digital Preview

Not a Photo

3d Model Viewer

About this Product

DJI Phantom transmitter Pitch Control Lever.

The DJI Phantom transmitter is equipped with a (hidden) seventh channel add the back of your transmitter that you can use to control your pitch (X1) position of your camera gimbal.

With this simple Pitch Control lever you can easily adjust your pitch position while flying with your Phantom. The control lever is attached add the back of your phantom transmitter with thin double sided tape (I recommend 0,15mm double sided tape from Tesa or 3M).

Main product Features:
  • One piece design
  • Turn stoppers (against potentiometer stress and wear and tear when turning to far)
  • Easy installation
  • Is made of the material Strong and Flexible (available in six colors)

    • !See video and photos above for an impression and building instructions.
      (See also this video from Arthur's Channel)

    Package contents includes:
  • 1 - 3D printed Pitch Control lever (In the color you ordered)

  • Not included but required:
  • Thin double sided tape (I recommend 0,15mm double sided tape from Tesa or 3M)

  • Additional comments:
    • If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
    • Because of the not constant 3d printing margins with this material it is possible that you have to remove some material from the axis / shaft with some fine grain sandpaper to make it fit.
    • By removing some material from the axis / shaft you can also determine the resistance of the lever, in other words how easy or not easy the lever can rotate to your own desired preference.

    In some cases, the potentiometer in the transmitter is not well-soldered and is skewed or not straight installed in the middle of the transmitter shell X1 hole. In those cases the (X1) pitch control lever will not fit (properly). You can solve this by re-soldering / bend the potentiometer, this is at your own risk! Before purchasing this upgrade please check if the potentiometer is properly centered / aligned (with a flashlight) in de transmitter shell X1 hole.


    If you have any comments or questions please leave a comment below.
    And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).

    Thanks and have Fun flying your Phantom!!
    What's in the Box
    INCM

    (X1) Pitch Control Lever installed on transmitter
    (X1) Pitch Control Lever in White Strong & Flexible
    Width Height Depth
    1.8 cm 3.22 cm 2 cm
    This model is 3D Printed in White Strong & Flexible: White nylon plastic with a matte finish and slight grainy feel.
    Model version 2 | Last updated on 10/20/2014

    Sign In or Join to comment.
     
     

    Favorited by (25)

    Logo

    Hello.

    We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

    Click anywhere outside this window to continue.