D-Mount to Micro Four Thirds Adapter

D-Mount to Micro Four Thirds Adapter 3d printed Adapter with Elgeet 12.5mm f1.9 lens
Adapter with Elgeet 12.5mm f1.9 lens
D-Mount to Micro Four Thirds Adapter 3d printed Adapter with Elgeet 12.5mm f1.9 lens
D-Mount to Micro Four Thirds Adapter 3d printed Adapter with Elgeet 12.5mm f1.9 lens
D-Mount to Micro Four Thirds Adapter 3d printed Back side of adapter
D-Mount to Micro Four Thirds Adapter 3d printed Back side of adapter
D-Mount to Micro Four Thirds Adapter 3d printed Sample photo
D-Mount to Micro Four Thirds Adapter 3d printed Sample photo
D-Mount to Micro Four Thirds Adapter 3d printed Adapter on Olympus E-PM1
D-Mount to Micro Four Thirds Adapter 3d printed Adapter on Olympus E-PM1
D-Mount to Micro Four Thirds Adapter 3d printed
D-Mount to Micro Four Thirds Adapter 3d printed
Digital Preview

Not a Photo

3d Model Viewer
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $14.02

About this Product

Prototype adapter for D-Mount lenses to Micro 4/3rds camera bodies.



UPDATE - 2013/01/25: It works! I was skeptical that I could reach the necessary flange focal distance without hitting the internals of the camera, but it does seem to just barely clear them. The threads are not perfect, but they are oversized - and with several careful installations of a D-Mount lens, they will be forged in to a good shape.

UPDATE - 2013/03/05: A user has let me know that the adapter does not allow their 13mm f/0.9 lens screw in far enough to achieve infinity focus. This may be unavoidable with faster lenses with larger bodies, however, I will see if a solution is possible and update the model if it is. See their comment at the bottom of this page.



I am updating the design to include more space for the flange of the lens - right now, the adapter can accommodate a lens with a flange diameter of approx. 20mm. Both of my D-Mount lenses were larger than this, however they both had an easily removable ring around the flange which allowed them to be mounted properly.

DISCLAIMER: I have only tested this on an Olympus E-PM1, as it is the only Micro 4/3rds camera I have. It may not work on other m4/3rds cameras... I've never looked at one closely. At this point, I would only order this adapter if your are looking to experiment, as I am still refining it. Obviously, it also vignettes heavily. This is a mostly unavoidable feature of using such a small lens on this camera



COMMENT FROM A USER OF THIS ADAPTER: I have tried this adapter. It fits well however the lens does not end up recessed enough with in the camera, in other words, it is not close enough to the sensor to achieve infinity focus. Also, the rear mount of the lens cannot screw all the way in because of the body features of my lens, which is a kern paillard 13mm f/0.9. The diameter of the rear of the lens body (not rear lens mount) contacts the lens adapter, and does not let the lens screw in any further due to this. So overall, deeper recession into the camera and a less narrow, perhaps flat end where the lens attaches to the adapter, and this adapter may work with infinity focus. Btw I tried this adapter using a kern paillard 13mm f/0.9 and a panasonic gh2.

Dimensions

IN: 2.138 w x 0.494 d x 2.138 h
CM: 5.43 w x 1.256 d x 5.43 h
Sign In or Join to comment.
 
 
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $14.02

Favorited by (5)

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.