You must be logged in and verified to contact the designer.
Product Description
This is the basic frame of the Imploder Sphere from the movie "The Arrival"
The way you finish this model is by using sculpy clay to build up the texture. After you make the clay texture, you put it in the
oven for 15 min and the sculpy will harden. You can then paint it and display it.
I have added handles inside the model so that you can slide the wings internally with a small RC model Servo.
Should be a fun project for anyone who liked the arrival.
There are 4 parts to this model.
here are the links to all 4 parts.
Wing handles. You will need to glue or fasten them on with screws.
https://www.shapeways.com/model/849152/imploder_wing_guide_handles.html?
key=cd166921a767b49e41cc2744427c8d9d
Slide out wings. The wings have holes where you will insert a reflective foil as seen in the prop photo above. You can also cut
out a mirror if you have a glass cutter.
https://www.shapeways.com/model/849151/imploder_wings.html?key=330bc6567485c303772e57eea0931366
This is the top body. As you can see there are slots for the wings to slide.
https://www.shapeways.com/model/849149/imploder_top.html?key=1aeed3e1d673714351cc0cc0b2fb2c97
Bottom body.
https://www.shapeways.com/model/849147/imploder_bottom.html?key=ce8c0e315e7fdb71e4b5c7cbf645ac91
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: