You must be logged in and verified to contact the designer.
Product Description
This is the "case" for the 10x24 caseless ammunition used in the USCM M41A Pulse Rifle. It is based on a design by Matsucorp, used with his written permission. In this particular model six cases are strung together on a sprue; it is plausible that in-universe the rounds are supplied like this, in a similar manner to NATO 5.56 on a stripper clip. If desired you can seperate them with diagonal cutters and a quick bit of sanding will clean them up.
To assemble you will need 10mm FMJ reload bullets similar to IK-215350 at Cabela's (Magtech bulk SJSP .44 mag). Also, the case is hollowed out to allow it to be weighted for balance; I used cut-off bits of solder for this, with a drop of epoxy. Green or OD seem to work. I'm experimenting with Krylon "stone" paint for the slightly pebbled look.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: