EV Body ATSF CE-8/CE-11

Designed to be compatible with the Atlas HO scale Extended Vision caboose, these carbody sides feature the window arrangement and other details found on ATSF Railway CE-8 cabooses in series 999700-999749 and CE-11 cabooses in series 999750-999824.

Update 10-24-15: Now includes bolt head detail and starter holes for curved grab irons at carbody corners and the grab iron ladders on the carbody sides.

Get the complete body kit:

[url=https://www.shapeways.com/cart/addMultiple?model_id[]=3889592&material_id=61&model_id =3853461&material_id=61&model_id=3907687&material_id=61&model_id=3877662&material_id=61]Add ATSF Class CE-8, Nos. 999700-999749 or Class CE-11, Nos. 999750-999824 Sides, Ends, Roof and Cupola to your cart[/url]

Cleaning the parts: I have read many recommendations for solvents to clean Frosted Ultra Detail and Frosted Extreme Detail parts of the waxy material that coats the surface of each part you receive from Shapeways. I've tried many of these products, from pure acetone to Bestine to isopropyl alcohol to plain soap and water. I have had mixed resutls with each one and in the case of alcohol I ended up with a bunch of ruined parts (to be fair, they were clean but warped beyond recognition and shrunken by a small amount). 
After much experimentation I discovered that the household cleaner Simple Green is an effective cleaner for Frosted Ultra Detail and Frosted Extreme Detail parts. The process for cleaning the parts is as follows:
Spray enough Simple Green to coat one side of the part. Using an old toothbrush, gently scrub the surface of the part for about 30 seconds. Repeat for the other sides and edges. Once the part has been scrubbed, use dishwashing detergent and a brush under cool water to remove all traces of the Simple Green and waxy residue. Next, rinse the part in cool water. Finally, dry the part with a hair dryer on the cool setting, with compressed air, or just allow the part to air dry. The part is then ready for use.