Audi A4 B6 armrest lid with spring pure

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed Snap the ring into the hock first
Audi A4 B6 armrest lid with spring pure 3d printed Snap the ring into the hock first
Audi A4 B6 armrest lid with spring pure 3d printed Now snap the pins into the holes on both sides
Audi A4 B6 armrest lid with spring pure 3d printed Now snap the pins into the holes on both sides
Audi A4 B6 armrest lid with spring pure 3d printed Overview of available parts: (left to right) part with spring replacement, red, black, with and original part
Audi A4 B6 armrest lid with spring pure 3d printed Overview of available parts: (left to right) part with spring replacement, red, black, with and original part
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

Audi A4 B6 armrest lid with spring pure 3d printed
Audi A4 B6 armrest lid with spring pure 3d printed
Digital Preview

Not a Photo

3d Model Viewer

About this Product

English version below!

Günstiges Ersatzteil für Audi A4 B6 Type 8E 8H Mittelarmlehnen bei gebrochener Verriegelung.

In Black Strong & Flexible ideale Farbe für dunkle/schwarze Innenraumausstattung.

Verwenden Sie diese Teil wenn die Original Feder NICHT vorhanden ist!!! siehe Bild des Originalteiles. Wenn die original Feder noch vorhanden ist und wiederverwendet werden soll, bitte andere Version verwenden. Bei dieser Version ist keine Ausbuchtung für die Fixierung der Originalfeder vorhanden! Wegen der flexiblen Funktion des Ringes ist das Teil nur in den „flexiblen“ Werkstoffen verfügbar.

Zum ersetzen Deckel der Armlehne ausbauen (dabei die beiden Halter des Deckels zusammendrücken und den Deckel aus der Armlehne herausdrehen). Den Deckel vom Stoff trennen, in dem man mit einem Spachtel Stoffteil und Deckel trennen und einfach zwischenhineinfährt und auseinanderdrückt, das Unterteil ist seitlich 6 x geklipst (siehe Bilder), es reicht wenn man nur die ersten beiden Klipse öffnet um die Verriegelung zu tauschen.

Zum Einbauen zuerst den Ring in der Mitte des Ersatzteiles in den Haken einhacken, dann die beiden Pins rechts und links in die Lagerbuchsen einschnappen lassen (siehe Bild), dann den Deckel wieder zusammen Klipsen. In der Nähe der Lagerbuchsen sind je eine Klebestelle, hier gegeben falls mit Sekundenkleber für mehr Haftung sorgen.

Auf Anfrage auch gerne mit individuellem Logo oder Design! Auf den Bildern sind das original Teil mit geklebten Stegen und das Teil in Black Strong & Flexible und Coral Red Strong & Flexible.

Diese Teil gibt es auch mit Audiringen, A4 oder quattro Aufschrift!

Low-priced spare part for Audi A4 B6 Type 8E 8H center armrests with a broken lock.

Black Strong & Flexible ideal color for dark / black interior detail only makes

Use this if the original spring NOT exists or not will be used! See picture of the original part. Otherwise use different version, because this version has not space to fix the original spring. Because of the flex function of the ring, this part is only available with “flexible” Materials.

To replace lid of the armrest disassemble armrest by squeezing the two holders of the armrest and remove. Separate the cover from the fabric, by using a putty knife cloth, the lower part is at the side clipped 6 times (see pictures). Just open the first two clips to replace the lock. To assemble take the ring in the middle of the spare part and mount it in to the hock at the cover, then the two pins can be left and right snap into the bushes, then clip the lid back together, Clips’ near the bushings are each a splice, here glue if necessary with super glue for more liability.

On request we can do with customized logo or design. In the pictures are the original part with taped ribs and the part in Black Strong & Flexible and Coral Red Strong & Flexible.

This part is also available with Audi rings, A4 or Quattro endorsement!

Dimensions

IN: 2.585 w x 0.929 d x 0.731 h
CM: 6.566 w x 2.36 d x 1.856 h
Sign In or Join to comment.
 
 

Favorited by (2)

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.