You must be logged in and verified to contact the designer.
Product Description
20 Westinghouse Brake Distributers
Version 1.4 (new sprue arrangement)
4mm Scale
The model contains 20 brake distributers arranged on a sprue
Based on the SAB-fitted version of the Westinghouse distributer
Designed for use with Tom Harwin's etched levers (available separately)
To complete, clean out the hole for the control pipe with a 0.4mm drill bit. Locators for the other two pipes can also be cleaned with the same bit.
To fit the etched handle, use a very fine (0.15mm) piece of wire (try using a single strand of fine multi-strand electric cable). Cut an over-sized piece of wire that you can hold (e.g. 3cm). Drill out a locator hole, apply a small amount of superglue to the end of the wire and fit in place. Thread on a pre-painted handle and position it (extra glue probably not required if you do this quickly). Once dry, snip off the excess wire.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: