Product Description
Detailed jerry can holders designed for IDF vehicles like the Tiran and IDF sherman tanks.
Enough racks for one sherman plus plenty of extras. These are closer to scale thickness than any photoetch racks and are much easier to install. Use the provided jig to set where you want your rack to be ( bottom of the jig lines up with bottom of rack) tape it to your model and start your drill holes.
after drilling your holes snip the rack off of the protective sprue and insert the rack to get proper stand-off.
use white glue or green-stuff to secure the rack and re-produce the weld bead around where the posts are attached to the tank hull/turret. Perfect standoff every time!
Also included is a bunch of hull-side tie-off handles that are attached the same way. more than enough to complete your tank, with some left over!
Some notes:
Clean the parts with water to remove residue form the printing process.
a light sanding is advisable after you prime them to remove any lines from the printing process.
Enough racks for one sherman plus plenty of extras. These are closer to scale thickness than any photoetch racks and are much easier to install. Use the provided jig to set where you want your rack to be ( bottom of the jig lines up with bottom of rack) tape it to your model and start your drill holes.
after drilling your holes snip the rack off of the protective sprue and insert the rack to get proper stand-off.
use white glue or green-stuff to secure the rack and re-produce the weld bead around where the posts are attached to the tank hull/turret. Perfect standoff every time!
Also included is a bunch of hull-side tie-off handles that are attached the same way. more than enough to complete your tank, with some left over!
Some notes:
Clean the parts with water to remove residue form the printing process.
a light sanding is advisable after you prime them to remove any lines from the printing process.
