Audi A4 B6 B7 armrest lid with spring pure

Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
3d Model Viewer
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Snap the ring into the hock first
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Snap the ring into the hock first
Snap the ring into the hock first
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Now snap the pins into the holes on both sides
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Now snap the pins into the holes on both sides
Now snap the pins into the holes on both sides
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Overview of available parts: (left to right) part with spring replacement, red, black, with and original part
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY Overview of available parts: (left to right) part with spring replacement, red, black, with and original part
Overview of available parts: (left to right) part with spring replacement, red, black, with and original part
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY
Audi A4 B6 B7 armrest lid with spring pure 3d printed Mechanical parts Maker/DIY

English version below!

Günstiges Ersatzteil für Audi A4 B6/B7 Type 8E 8H Mittelarmlehnen bei gebrochener Verriegelung.

In Black Strong & Flexible ideale Farbe für dunkle/schwarze Innenraumausstattung.

Verwenden Sie diese Teil wenn die Original Feder NICHT vorhanden ist!!! siehe Bild des Originalteiles. Wenn die original Feder noch vorhanden ist und wiederverwendet werden soll, bitte andere Version verwenden. Bei dieser Version ist keine Ausbuchtung für die Fixierung der Originalfeder vorhanden! Wegen der flexiblen Funktion des Ringes ist das Teil nur in den „flexiblen“ Werkstoffen verfügbar.

Zum ersetzen Deckel der Armlehne ausbauen (dabei die beiden Halter des Deckels zusammendrücken und den Deckel aus der Armlehne herausdrehen). Den Deckel vom Stoff trennen, in dem man mit einem Spachtel Stoffteil und Deckel trennen und einfach zwischenhineinfährt und auseinanderdrückt, das Unterteil ist seitlich 6 x geklipst (siehe Bilder), es reicht wenn man nur die ersten beiden Klipse öffnet um die Verriegelung zu tauschen.

Zum Einbauen zuerst den Ring in der Mitte des Ersatzteiles in den Haken einhacken, dann die beiden Pins rechts und links in die Lagerbuchsen einschnappen lassen (siehe Bild), dann den Deckel wieder zusammen Klipsen. In der Nähe der Lagerbuchsen sind je eine Klebestelle, hier gegeben falls mit Sekundenkleber für mehr Haftung sorgen.

Auf Anfrage auch gerne mit individuellem Logo oder Design! Auf den Bildern sind das original Teil mit geklebten Stegen und das Teil in Black Strong & Flexible und Coral Red Strong & Flexible.

Diese Teil gibt es auch mit Audiringen, A4 oder quattro Aufschrift!

Low-priced spare part for Audi A4 B6/B7 Type 8E 8H center armrests with a broken lock.

Black Strong & Flexible ideal color for dark / black interior detail only makes

Use this if the original spring NOT exists or not will be used! See picture of the original part. Otherwise use different version, because this version has not space to fix the original spring. Because of the flex function of the ring, this part is only available with “flexible” Materials.

To replace lid of the armrest disassemble armrest by squeezing the two holders of the armrest and remove. Separate the cover from the fabric, by using a putty knife cloth, the lower part is at the side clipped 6 times (see pictures). Just open the first two clips to replace the lock. To assemble take the ring in the middle of the spare part and mount it in to the hock at the cover, then the two pins can be left and right snap into the bushes, then clip the lid back together, Clips’ near the bushings are each a splice, here glue if necessary with super glue for more liability.

On request we can do with customized logo or design. In the pictures are the original part with taped ribs and the part in Black Strong & Flexible and Coral Red Strong & Flexible.

This part is also available with Audi rings, A4 or Quattro endorsement!

cm: 6.566 w x 1.856 d x 2.36 h
in: 2.585 w x 0.731 d x 0.929 h

Comments

 
@jdchen : sorry this is a point what goes to shapeways, there is a "black material" avalible at there material supplier, which locks perfect grey, but shapeways do not offer it. BR
March 10, 2014, 7:43 am
@worldleader - I did wind up buying the black one (other one was white) - looks pretty nice in my car but I had seen that the other handles were available in grey nylon which was a closer match. Any chance that the latch with spring will be available in that grey nylon color? Thanks!
March 10, 2014, 2:03 am
@jdchen : hi, if I am right there are 2 interior colors: grey and black, you can order the part black, or color it by yourself with textil color or just with a black marker. grey is difficult to color but may be would work. I was astound how good black looks in the grey interior. best regards.
March 9, 2014, 9:32 pm
Ordered this part to replace the broken latch on my 2006 Audi A4. Since I had lost the little metal spring that was on the original latch, I ordered the piece that had the replacement spring. Part fits perfectly and now I have a working latch again on my center console! Material that the new latch is made from feels durable and of high quality. One thing that would have been nice is to be able to get the piece in the color of my cars interior (dark grey) Has anybody tried painting these pieces to match the interior color of the car?
March 9, 2014, 6:51 pm
 
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $20.51