Introducing 14k Gold, read more on the blog.

Red Lantern Atrocitus Ring (Small)

Choose Material
  • Stainless Steel

    Bronze-infused stainless steel with visible print lines and rough feel.

    $49.99

This is a ring I created based on the one worn by Atrocitus, founder of the Red Lantern Corps. This version has a smaller face for a subtle look and feel. Choose your size from the list below and it will be added to your cart. You can select your preferred material in the cart before checkout.

Size 3 Size 3.5 Size 4 Size 4.5 Size 5
Size 5.5 Size 6 Size 6.5 Size 7 Size 7.5
Size 8 Size 8.5 Size 9 Size 9.5 Size 10
Size 10.5 Size 11 Size 11.5 Size 12 Size 12.5
Size 13 Size 13.5 Size 14 Size 14.5 Size 15

With the Shapeways Print-on-Demand service, you can order this ring in any size, in any material, at any time. Please note that, with the exception of the Full Color Sandstone material, the color, look, and feel of the ring is defined by the material you choose, not the model image.

This ring will be produced and delivered through Shapeways and it’s partners.

For questions regarding your order, please contact Shapeways through their contact page at shapeways.com/contact.

For questions regarding the design of this, or any of my other rings and models, feel free to send me a private message. Also, if you have any ideas for new rings that you would like to see me design, please let me know.

Green Lantern, Red Lantern, Atrocitus, and all related marks are trademarks of Warner Bros. and DC Comics.

Dimensions

IN: 0.877 w x 0.877 d x 0.877 h
CM: 2.228 w x 1.114 d x 2.414 h

Comments

 
That's awesome!
January 18, 2013, 5:39 am
its still worth it though, cause now i can go up to people at my job looking pissed and creep them out with the red lantern oath XD
January 18, 2013, 5:33 am
the red strong and flexible, but i would recomend getting the white strong and flexible and painting/polishing it yourself, because after a couple of days of wearing it, the red faded to a light red. I think it faded because of the fact that i washed my hands with it on.
January 18, 2013, 5:32 am
@monkeyd1000 What material did you get it in?
January 15, 2013, 4:53 pm
@bigmac2192 yes he is. I just got mine today, and it freakin rocks XD
January 15, 2013, 4:28 pm
Are you still making these?
January 14, 2013, 2:24 am
Stainless steel is stainless steel. If you want it red you'll have to paint it red yourself.
November 25, 2012, 10:09 am
If I want the material as stainless steel, can it be red too?
September 22, 2012, 12:53 pm
Do you have any pics of atrocitus red lantern ring already in stainless steal? I want to buy one but you dont have any pictures.
May 28, 2012, 2:12 pm
I'm trying to determine from your Q & A below if the White, Strong & Flexible rings come in colors? Would a colored ring be a different cost? If so what? We would like to purchase a Atrocitus' Red Lantern Ring and an Indigo design, both in a size 7
April 27, 2012, 8:43 pm
And what material is the red strong and flexible? is it good fro everyday use and wear?
December 9, 2011, 1:29 am
Hello, Is there a way that this ring can be made to already be red? like the whole thing? I am very interested in buying a red lantern corps ring but I am trying to find one that is most like the actual ring, which would mean the whole thing is red. Can you do this? and out of what material?
December 9, 2011, 1:28 am
Alright, trusting your advice...I ordered a size 12 for me and a size 7 for a friend. She's super excited and I have to admit I am pretty jazzed, too! It's gonna be a long 3-4 weeks, LOL
April 14, 2011, 4:09 am
Stainless steel would probably be the best for every day.
April 11, 2011, 5:21 am
If I want one for everyday wear, what material would you suggest? I would love for it to be red, but I'm okay with steel if I might be able to lay in some red enamel into the signet part.
April 11, 2011, 4:16 am
Okay thank you
December 21, 2010, 12:16 pm
No worries. Unfortunately no, I just found out that all of my rings have trouble printing in sandstone, because of the wall thickness in the details of the signet. However, I haven't gotten any trouble from the Red dyed White Strong and Flexible if you'd like to get it in red.
December 21, 2010, 8:25 am
Sorry computer freaked out.
December 21, 2010, 2:28 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
I tried ordering this in full color sandstone and it said the dimensions were too thin... I was wondering if there was a way for that to be fixed? I have drooling over this for a while and really would like to wear it.
December 21, 2010, 2:27 am
If you want it as a size 10, all you have to do is click the add to cart button. You can choose the material you'd like it printed in from there. If you choose the full color sandstone material, it will print in red.
September 26, 2010, 7:23 am
hi... I would like to buy the ring shown as it is. size 10. What must i do ?
September 23, 2010, 4:34 pm
Hi Pathless. The rings are based on the size and the material you choose. In terms of color, you can dye or paint any of the plastic ones. The stainless steel doesn't come in colors yet, although you can (for a limited time) get it in gold plated stainless steel. I have not designed a sandstone/color version of my rings yet, but i'm planning on doing that in the next couple of weeks. As for Guy Gardner red ring, it is not just a signet, you can see what it looks like here: http://www.weeklycrisis.com/2009/12/green-lantern-corps-43-review.html As for that one, I have not had time to design that one yet, but it's at the top of my to-do list. It's coming, I promise.
May 18, 2010, 4:44 am
hi, i would like a red lantern ring. how much? and i will let you know the size. i bought one off of ebay, its awesome, but its too big. its a size ten. i will obviously need to be red. btw, whats the guy gardner ring difference? i need pics! thank you . please contact me david. cheers
May 16, 2010, 11:01 pm
Yup, I'm working on it.
April 8, 2010, 2:54 pm
I was wondering if you could create a model that is similar to Guy Gardner's red lantern ring. The front of the ring makes a sort of horn look as it comes off the base. It's very cool, i'll be willing to pay quite a bit. I've been looking everywhere for someone to do this. If you want I can email you a pic of him with the ring.
April 7, 2010, 10:08 pm