Introducing 14k Gold, read more on the blog.

HipBone: Garmin Forward Mount for Mountain Bikes

  • Coral Red

    Pinkish red, richly colored nylon plastic with a smooth finish.

    $30.00

HipBone: Tough and Rugged

Put your Garmin Edge 200, 500, 510, 800 or 810, centered and in your line of sight with the HipBone. Forward mounting offers better reach and viewing access for scanning your ride data on the fly. Light and stiff the HipBone weighs in at 15 grams (the OEM forward mount is 27 grams), and is at home on your mountain, road or commuter bike. See it in action here.

 

HipBone fits all 31.8 mm diameter handlebars and is carbon safe.

 

Small Parts

You will need to purchase separately, two M4 x 14mm or longer socket head screws and nuts. Although not required, two o-rings can be installed for added security. Look for 9/16" inside diameter, 3/32" thickness (AS568-113) for a tighter fit or 5/8” inside diameter, 1/16” thickness (AS568-016) for increased friction between mount and handlebar. O-rings are typically found in the plumbing aisle of your local hardware store or online.

 

Assembly of Small Parts

Once you receive the HipBone printed part it is important to inspect all attachment features on the part. You may want to use a toothpick to clear out any residual “build material” (which will look like dust) that might have made it past the Shapeways technicians. Because of the precision and small size of the attachment features, it is necessary that all surfaces be clear of unwanted material for proper function of the part.

 

Important: Before you insert the nuts into the part (see image sequence above), you may need to clear out any loose or packed-in build material from the cavity that captures the nut. This can be done with a toothpick. Once inserted into the capture feature the nut should align with the screw hole on either side. If the nut and screw holes are not aligned you can remove the nut and inspect the feature for any loose debris that might be interfering with proper alignment.

 

Also inspect the eighth turn mount feature (where the Garmin locks on) for any residual build material. Typically this is not a problem, but there may be unwanted material packed-in around the locating features (protrusions left and right), accessible from opposite the mounting side.

 

Mounting Torque: Tighten the mounting screws just enough to secure the mount to the handle bar, do not over tighten. The force required to lock the mount in place is very small. Although the “strong and flexible” nylon material is extremely tough, it can fail if over stressed in the mounting process.

Dimensions

IN: 2.936 w x 2.936 d x 2.936 h
CM: 7.458 w x 11.444 d x 5.428 h