UMX 28mm Case For Spin Outrunner

UMX 28mm Case For Spin Outrunner 3d printed
cm: 4.14 w x 3 d x 2.846 h
in: 1.63 w x 1.181 d x 1.12 h


@fluxnstuff Assuming everybody is buying this for an already-built plane...
March 17, 2014, 4:04 pm
Inside the Habu Umx.....SIMPLY PUT AWESOME
December 10, 2013, 9:55 pm
December 10, 2013, 9:52 pm
@jlevine before you can use this great EDF, you will need to get a UMX MiG15 ($150), tear it apart, and graft an aftermarket 15amp ESC to the stock receiver cause you cant use this high powered setup with the stock electronics or the stock battery. i made a "how-to" video for add the ESC here: feel free to join the discussion and get answers here:
February 17, 2013, 6:53 am
@fluxnstuff that is very cool - would love to know all the parts for this kit
February 17, 2013, 4:30 am
My NitroCharged UMX 28mm EDF shroud in a E-flite UMX MiG15 with a HP06v2 16200kv by Oversky and a AEO 27mm 7 blade fan. this setup produces a peak thrust of 84grams at 6.97v and 13.91amps. Note: careful when removing a tight fitting fan, you can crack the motor mounts. i suggest you purchase a second unit as a spare. i cracked one of mine removing a fan. this is not necessarily a defect, but a restriction of clearance that the short output shafts of the small outrunners mandate. i could not suggest a modification to improve it. just be careful and get a spare or 2. GREAT JOB NitroCharged.
February 16, 2013, 10:04 pm
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.


Favorited by