Star Driver Tool 2

Star Driver Tool 2 3d printed Gadgets Maker/DIY 1/4" Hex Bit Driver and 10mm Hex Driver shown on top of tool.
1/4" Hex Bit Driver and 10mm Hex Driver shown on top of tool.
  • Stainless Steel

    Bronze-infused stainless steel with visible print lines and rough feel.

    $28.27

I present my second one-piece driver/spanner tool with a variety of different driver points.
This tool is designed to accept the carrying of either the Head Turner or Head Turner: Tofty Edition tools by mdahlgren on the 10mm hex post (head turner tools not included).
These tools contain a set of smaller drivers to compliment the Star Driver 2's own substantial set of tools:
6.5 x 1.2mm flat driver,
No.2 posidriv driver,
6mm hex driver,
10mm hex driver,
T25 torx driver,
T30 torx driver,
1/4" hex bit driver,
13mm socket spanner.

Most of the driver arms have a 1/4" hex profile to allow the attachment of torque-increasing bars and ratcheting tools to help drive stiff screws.
An o-ring is required to complete the assembly to help hold a 1/4" square drive socket on the square post (5mm ID, 1mm diameter, not included).

This model is designed to be printed in Stainless Steel or one of it's variants.
Although all care has been taken to ensure this model is correctly sized, due to variations in the printing process, some filing may be required to ensure correct fitment of some of the drivers and/or spanners.
The tool can easily be secured to a keychain or lanyard with a 10mm split ring or a No.2 McGizmo clip or similar 25mm gate clip using the hole in the flat driver.

There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.

Dimensions

IN: 1.378 w x 1.378 d x 1.378 h
CM: 3.5 w x 1.286 d x 3.192 h