This is a small version of Triple Gear.

In this unusual mechanism three gears mesh together in pairs, and yet they can turn!

If you take three ordinary gears and put them together so that each gear meshes with the other two, then none of the gears can turn because neighbouring gears must turn in opposite directions. Triple gear avoids this problem by having the three "gears" arranged like linked rings - the gears then rotate along skew axes, and the opposite direction rule no longer applies (although see also Oskar van Deventer's Magic Gears for another possible solution).

This is joint work with Saul Schleimer. We were inspired by another of Oskar's designs, his Knotted Gear, which consists of two linked rings that gear with each other, and of course we wondered if it would be possible to do three linked rings!

A note on materials: I have so far printed it in White Strong & Flexible, and Strong & Flexible Polished. It may arrive with the rings slightly fused together, but gently moving them back and forth will loosen them up, and the mechanism gets smoother with use. The polished and dyed versions seem to work fine as well, and may require less working in. I haven't tested any of the "frosted detail" materials, but I imagine that they should work fine. It isn't printable in the other "detail" materials because of cleaning problems.

Here is a video showing how to loosen the gears if they arrive somewhat fused together.


Dimensions

IN: 1.72 w x 1.824 d x 1.117 h
CM: 4.368 w x 4.632 d x 2.838 h

Comments

Sign In or Join to comment.
 
I received mine, it's the White Strong & Flexible Polished. It worked out of the box, without any need to loosen or anything. It works very well and is not too small. It's a decent size for a desk toy.
March 17, 2014, 12:02 pm
@georgeedwardsmail Glad to hear it worked out!
December 15, 2013, 6:11 am
@henryseg I completely take back what I said (I've deleted the comment now). It works really well, you just need to move all three at once. Moving one or two gears simultaneously results in a seize-up. There's a bit of a knack to it, but it works extremely well. I'm totally addicted to turning it now.
December 15, 2013, 6:11 am
@georgeedwardsmail Did you see the video I made on loosening them up? http://www.youtube.com/watch?v=-Y_IyGMIyNE
December 15, 2013, 2:19 am
@JeffEdmonds Is this still the case after working it in? In my experience you have to play with it for about 15 minutes to an hour before it runs at all smoothly. Also, it never seems to run as smoothly as the big guy. If you are still unhappy with it, contact me or Henry and I'll try to get you a refund.
October 4, 2013, 12:11 pm
Stiff. Does not really turn. Lame
July 1, 2013, 4:31 pm
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.