[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
Digital Preview

Not a Photo

3d Model Viewer

About this Product

[Please note: This is the original version of the hood, there is now a 2nd version with cutout, alignment marker and slightly wider opening. Both work fine.] This hood fits to the existing bayonet attachment via a very tight friction fit. On first fitting it may feel you are forcing it, but this is normal and the mount has been tested across 3 different examples. The print maybe a little tighter than usual, if this is the case, cleaning out the bayonet grooves will remedy the situation. This hood will also work on the Zeiss 50/2 Planar, tho won't offer as much shading as it's dedicated hood. This is a compact hood for the Voigtlander 35mm f1.4 Nokton Classic lens, as a replacement for the £48+ one that Voigtlander offers. It's more compact and has been calculated to offer greater shading. Because the Voigtlander 40mm f1.4 Nokton Classic is almost the same lens, but will a narrower FOV, this hood will also work for this lens too. It's rectangular cutout is 10% wider than the lens' field of view for full frame, has been tested on a full frame camera without vignetting. On a crop body such as the M8 or NEX ranges, there should be no problem at all.

Dimensions

IN: 2.132 w x 2.008 d x 0.787 h
CM: 5.416 w x 5.1 d x 2 h
Sign In or Join to comment.
 
I would suggest spray some Krylon UV Clearcoat to prevent any material rubbing off. http://www.dickblick.com/products/krylon-uv-resistant-clear/?clickTracking=true&wmcp=pla&wmcid=items&wmckw=21703-1005&gclid=Cj0KEQjwgryfBRDn7cvY-pOit4cBEiQAB3nTbjRjo8Ka64YrD6LNxZWpcFZYvSEhilBl5LxPqlVpwDQaApNu8P8HAQ
August 16, 2014, 3:09 pm
Just received my copy of the compact hood for use on my CV 35 1.4 and it really looks great! :) I have to report though that it does cause the lens to vignette quite a bit more than usual when shooting wide open. Stopping down past f2.8 is perfectly fine.
June 19, 2014, 2:42 pm
@AnalogueRobot Just received my copy. Looks great! Covered in a thin layer of nylon plastic dust though - the more you touch the hood, the more the material it rubs off. Is there a way to treat or seal the hood? (worried over prolonged use, rubbed dust will infiltrate the lens or camera - say while being banged around a camera bag)
March 21, 2014, 7:50 pm
is this this hood compatible with the zeiss c biogon 35/2.8? if not, do any of your other models work? Many thanks.
February 18, 2014, 11:09 am
does it fit the 35 2.5 also??
February 10, 2014, 12:39 pm
The hood does not fit the x20
February 4, 2014, 9:58 am
The regular cap fits inside the hood
February 4, 2014, 9:57 am
Can it used with fuji x20 ?
February 3, 2014, 5:06 pm
The Compact Hood is now featured on our homepage. Enjoy!
November 25, 2013, 3:04 pm
Will there be a hood cap fitting this hood?
April 20, 2013, 10:23 am
April 19, 2013, 8:57 pm
What size hood cap that will fit on it? Thanks.
March 29, 2013, 6:58 am
 
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $30.00
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.