[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood

[Ver 1] CV 35/1.4 & 40/1.4 Compact Hood 3d printed Mechanical parts Maker/DIY
[Please note: This is the original version of the hood, there is now a 2nd version with cutout, alignment marker and slightly wider opening. Both work fine.] This hood fits to the existing bayonet attachment via a very tight friction fit. On first fitting it may feel you are forcing it, but this is normal and the mount has been tested across 3 different examples. The print maybe a little tighter than usual, if this is the case, cleaning out the bayonet grooves will remedy the situation. This hood will also work on the Zeiss 50/2 Planar, tho won't offer as much shading as it's dedicated hood. This is a compact hood for the Voigtlander 35mm f1.4 Nokton Classic lens, as a replacement for the £48+ one that Voigtlander offers. It's more compact and has been calculated to offer greater shading. Because the Voigtlander 40mm f1.4 Nokton Classic is almost the same lens, but will a narrower FOV, this hood will also work for this lens too. It's rectangular cutout is 10% wider than the lens' field of view for full frame, has been tested on a full frame camera without vignetting. On a crop body such as the M8 or NEX ranges, there should be no problem at all.
cm: 5.416 w x 5.1 d x 2 h
in: 2.132 w x 2.008 d x 0.787 h

Comments

 
@AnalogueRobot Just received my copy. Looks great! Covered in a thin layer of nylon plastic dust though - the more you touch the hood, the more the material it rubs off. Is there a way to treat or seal the hood? (worried over prolonged use, rubbed dust will infiltrate the lens or camera - say while being banged around a camera bag)
March 21, 2014, 7:50 pm
is this this hood compatible with the zeiss c biogon 35/2.8? if not, do any of your other models work? Many thanks.
February 18, 2014, 11:09 am
does it fit the 35 2.5 also??
February 10, 2014, 12:39 pm
The hood does not fit the x20
February 4, 2014, 9:58 am
The regular cap fits inside the hood
February 4, 2014, 9:57 am
Can it used with fuji x20 ?
February 3, 2014, 5:06 pm
The Compact Hood is now featured on our homepage. Enjoy!
November 25, 2013, 3:04 pm
Will there be a hood cap fitting this hood?
April 20, 2013, 10:23 am
April 19, 2013, 8:57 pm
What size hood cap that will fit on it? Thanks.
March 29, 2013, 6:58 am
 
  • Black Strong & Flexible

    Black nylon plastic with a matte finish and slight grainy feel.

    $30.00

Favorited by