Design by pirsquared
(0)
Solved
Solved
Solved
Normal Turn 2
2 Normal Turns
More Normal Turns
Jumbling Turn
Scrambled 1
Scrambled 2
The Radio Cube 3 is a cubic transformation of Jason Smith's Radiolarian 3. It has icosahedral cut geometry, and it is slightly shallower-cut than my DeFTI (aka "Eitan's Star" soon to be released by MF8). To build this puzzle, you will need 20 flat-head M3 screws that are at least 12mm long (or the standard equivalent). You can buy stickers at Oliver's sticker shop: http://speedcubing.hu/webshop/index.php?main_page=product_info&cPath=6_41&products_id=386
cm: 4.498 w x 4.498 d x 4.498 h
in: 1.771 w x 1.771 d x 1.771 h

Well then, because already there is I have him to house. I understands what you intend, from us in Italy the mantua it produces the glue blue and red, Cyanoacrylic. The blue one acts once in 5 seconds terrible for the hands I have detached the skin to unstick two fingers. the red is more slow it acts in 35 45 seconds and fortunately me is remained only this to house. here is the glue http://www.d-daymodels.it/Modello.htm?pk=1682 . Tomorrow I will try with the red glue hoping not to whiten the cube, The plastics of shapeways is excellent but honestly not is done for attaching him stickers than above. I make you know.
@Godlegend I have used cyanoacrylate glue, which is commonly known as "super glue." But I use a type that is a little more viscous than typical super glue. Here's a link: http://goo.gl/imX2r
The cube is fantastic, solid, it turns very well, I like a lot the plastics, is a sin to put the stickers, is beautiful also without. :) The difficulty will be to resolve it. For the stickers, the more glue' strong that know is the glue Cyanoacrylic that is used for the naval modelling, that acts in 5 seconds and he doesn't detach anymore', but after 5 minutes ago to become the white plastics, in practice it corrodes it (dangerous for the cube). You that glue you have used? could you point out me one of it of a famous brand so' that can also find it from me, or you tell me that you have used you? Thanks
@Godlegend I would recommend using super glue to get the stickers to stick. It's kind of a pity, but that's the only way I've found to get the stickers to stick. How do you like the puzzle?
I have assembled the cube, however' the stickers of oliver don't stick to the rough plastics of the cube :( , that I can do? do I have to glue them with some particular glue? Eitan you can help me?
Hi Eitan, excuse you could post a photo of one of the 20 screws? Or can you post an Url of shop online that he sells these screws? I Want to exactly see as they have to be. Thanks
ok in these days I will make the purchase, compliments for your creations, also the Celtic cube is very beautiful, but because is 4 times the price of the radio cube 3 :( ?
@Godlegend Nope. No springs needed.
ok, but the puzzle it needs springs to correctly rotate?
@Godlegend Unfortunately, the package does not come to me. I'm sure that if you go to any local hardware store you can find the screws or the inch equivalents.
Ok thanks :) I thought they were the measures of the puzzle. Is a problem if in the package with the puzzle you put also the 20 flat-heads M3 screws (I can pay her. I would like to be sure not to be wrong). do they serve springs for the 20 flat-heads M3 screws?
@Godlegend Those are the dimensions of the print, but not of the puzzle. The puzzle has an edge length 65mm.
Are The measures exact? cm: 4.498 w x 4.498 d x 4.498 h? on shapeways they say 6,5 cm (65mm). ??

\$ United States
##### Material Options
• White Strong & Flexible

\$150.00
• White Strong & Flexible

\$150.00
• Black Strong & Flexible

\$170.00