Capacitor Bracket

Capacitor Bracket 3d printed Download Maker/DIY
Capacitor bracket for a capacitor 47mm in diameter. Has a bridge to allow wires to pass underneath. It has holes along the circular portion to allow zip ties to pass through. Holes are for #4-40 or M3 screws.

This is version 2. I thickened the walls to 2mm and added a channel to guide through the zip tie. No more hassle of using tools or unscrewing the whole bracket from the chassis to poke at the zip tie to try to get it through the 2nd hole.

The project can be seen at
cm: 4.7 w x 2 d x 1.05 h
in: 1.85 w x 0.787 d x 0.413 h


  • White Strong & Flexible

    White nylon plastic with a matte finish and slight grainy feel.


Favorited by