This is the first version of the NA that has been produced.Few changes have been made to the current version.View the renders provided to see the changes.
HOn30 PBR NA
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$61.39
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a generic model of the Puffing Billy Railway NA.
It fits over a Graham Farish Class 08 N scale mechanism.
The kit contains the following parts :
1 The NA Body
2 A pair of bogies and wheelsets(1.5mm dia screws are needed to fix the bogies to the body.)
3 A chimney which can be fixed on the spigot provided.
4 Three pairs of number plates (1A,14A,17A) with tabs that fit into slots in the side tanks.
5 Two caps that fit into slots under the water tanks.
6 Two pairs of connecting rods.(The working of these rods has not been tested)
A second chimney and number plates ie.2A to 17A are available separately in my shop.
Slots are provide for attaching N scale micro-couplers.
The side tanks are hollow which can filled with araldite and buckshot to increase weight.
The fine detail of the number plates print well only in the Frosted Ultra-Detail version.Decals can be used if you order this model in the Frosted detail material.
The decal sheet for this model can be downloaded below:
https://www.shapeways.com/forum/index.php?t=msg&goto=52567msg_52567
It fits over a Graham Farish Class 08 N scale mechanism.
The kit contains the following parts :
1 The NA Body
2 A pair of bogies and wheelsets(1.5mm dia screws are needed to fix the bogies to the body.)
3 A chimney which can be fixed on the spigot provided.
4 Three pairs of number plates (1A,14A,17A) with tabs that fit into slots in the side tanks.
5 Two caps that fit into slots under the water tanks.
6 Two pairs of connecting rods.(The working of these rods has not been tested)
A second chimney and number plates ie.2A to 17A are available separately in my shop.
Slots are provide for attaching N scale micro-couplers.
The side tanks are hollow which can filled with araldite and buckshot to increase weight.
The fine detail of the number plates print well only in the Frosted Ultra-Detail version.Decals can be used if you order this model in the Frosted detail material.
The decal sheet for this model can be downloaded below:
https://www.shapeways.com/forum/index.php?t=msg&goto=52567msg_52567
Tags
puffing billyDetails
What's in the box:
HOn30 PBR NA
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$16.99
$26.32
$26.29
$28.61
