HOn30 PBR 25 Ton Climax #1694 v1

HOn30 PBR 25 Ton Climax #1694 v1 3d printed Miniatures Vehicles
This locomotive fits over a LifeLike GP 18.A bit of filing might be needed for making the motor fit the body.

Side frames have to be removed from the body shell and attached to the donor mechanism (a Life Like GP 18 - the older version with the plastic frame - NOT the newer metal split frame version).
The donor's bogie side frames filed flat and super gluing the 3D frames on.

The Decals for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&th=10511&start=0&
cm: 5.92 w x 4.06 d x 10.42 h
in: 2.331 w x 1.598 d x 4.102 h

Comments

 
Has anyone completed this model? I have a donor GP 18 mech that is waiting. I'm just hesitant to pull the trigger on something I haven't seen completed.
December 31, 2013, 5:23 pm
Of course you can, if you want to use a superior mechanism, cut away! But not for the faint hearted. Also the older mech is much cheaper , at least a third the cost of the newer mech. If you attempt this please let me know how it goes.
August 17, 2012, 10:24 am
If the shell isn't made of metal why can you not use a split frame gp 18?
August 17, 2012, 6:57 am
This model is being tested for printing.It will be available once the test model is out.
July 26, 2012, 12:28 pm
When do you plan on releasing this kit?
July 25, 2012, 9:59 pm
 
  • Frosted Detail

    Matte translucent plastic with fine print lines that reveals small details.

    $54.92

Favorited by