Assassin's Creed ring - medium sizes (16 to 22)

Design by nakamura_shop
    (8) 
    • 4.63 out of 5
    • *
    • *
    • *
    • *
    • *
(70) Comments
Contact Designer
Thanks to LaceWingedSaby http://lacewingedsaby.deviantart.com/
Thanks to LaceWingedSaby http://lacewingedsaby.deviantart.com/
Thanks to LaceWingedSaby http://lacewingedsaby.deviantart.com/
Thanks to LaceWingedSaby http://lacewingedsaby.deviantart.com/
Thanks to LaceWingedSaby http://lacewingedsaby.deviantart.com/
in order from left: bronze,gold,silver (glossy), steel,silver,gold,bronze (matte)
in order from left: bronze,gold,silver (glossy), steel,silver,gold,bronze (matte)
in order from left: bronze,gold,silver (glossy), steel,silver,gold,bronze (matte)
3d Model Viewer
render
render
render
Silver Glossy version (real photo)
Silver Glossy version (real photo)
Silver Glossy version (real photo)
-Default size is D.18mm (finger diameter) - Assassin's ring the size is adaptable because the ring is flexible - now the model is a Co-creator - Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol
cm: 2.086 w x 2.116 d x 1.75 h
in: 0.821 w x 0.833 d x 0.689 h
Report abuse

Comments

You must login to leave a comment
 
nakamura_shop
nakamura_shop says:
@HighKing you mean 9 and 10 in US size? look this page http://www.themeter.net/ring_e.htm in this case the sizes (diameter in millimeter) is 19mm and 20mm
Reply
May 2, 2013, 8:18 pm
HighKing
HighKing says:
I was checking my ring size and i need a 9 or 10 is there any way i get can it in that size?
Reply
May 2, 2013, 5:56 pm
Bradp1990
Bradp1990 says:
@nakamura_shop I know i wait patiently good quality takes time i look forward to receiving and i will def post about my satisfaction
Reply
March 26, 2013, 10:12 pm
nakamura_shop
nakamura_shop says:
@Bradp1990 now you have to wait the time for construction,Shapeways is punctual with delivery, you'll be satisfied
Reply
March 24, 2013, 8:59 am
Bradp1990
Bradp1990 says:
I made an order i am excitingly awaiting the delivery
Reply
March 23, 2013, 9:01 pm
Bradp1990
Bradp1990 says:
@nakamura_shop Its ok it was a random thought but thank you
Reply
March 15, 2013, 12:27 pm
nakamura_shop
nakamura_shop says:
@Bradp1990 i can use only the materials proposed by shapeways
Reply
March 13, 2013, 5:13 pm
Bradp1990
Bradp1990 says:
@nakamura_shop Random question can you do it in surgical steel? My friend and i were discussing it and just wanted to know.
Reply
March 13, 2013, 7:28 am
Bradp1990
Bradp1990 says:
@nakamura_shop thank you sorry if i am being really picky. Just question everyhtin be for spending that hard earned money you know what i mean? but thanks for the info i think i will be making a purchase here in a few days
Reply
March 12, 2013, 10:44 pm
nakamura_shop
nakamura_shop says:
@Bradp1990 Usually plated material can make green your finger, but until now this is never happen to me with shapeways items. If you want to be absolutely SURE you can buy stainless steel or silver (silver is more expensive but beautiful) All metarials have the same level of finish surface but glossy materials look better
Reply
March 11, 2013, 8:41 pm
Bradp1990
Bradp1990 says:
Btw thank you all i am just curious before i buy. I want something durable, that i can wear 24/7 with out the green, and preferably something that doesn't tarnish and something that has a nice clean shiny finish.... maybe i am asking too much lol
Reply
March 8, 2013, 8:59 am
Bradp1990
Bradp1990 says:
@holicaholic Nvm lol i see you answered that does it leave green on your finger?
Reply
March 8, 2013, 8:53 am
Bradp1990
Bradp1990 says:
@holicaholic Thank you kindly. Now what type of metal did you get?
Reply
March 8, 2013, 8:51 am
nakamura_shop
nakamura_shop says:
@holicaholic i understand...i need a new couple of eyes
Reply
March 4, 2013, 9:06 pm
holicaholic
holicaholic says:
@nakamura_shop bronze, medium
Reply
March 4, 2013, 8:33 pm
nakamura_shop
nakamura_shop says:
@holicaholic thank you!!! this is a stainless steel version large size,right?
Reply
March 4, 2013, 8:30 pm
holicaholic
holicaholic says:
@Bradp1990
Reply
March 4, 2013, 7:31 pm
holicaholic
holicaholic says:
@Bradp1990
Reply
March 4, 2013, 7:30 pm
holicaholic
holicaholic says:
@Bradp1990
Reply
March 4, 2013, 7:29 pm
nakamura_shop
nakamura_shop says:
@Bradp1990 the first photo and the last photo are not rendered images,are real! the first is stailess steel and the last is silver
Reply
March 4, 2013, 10:32 am
Bradp1990
Bradp1990 says:
I am interested but the the rendered pics don't show me enough details on the ring i would like to see some real life photos of them if i can please.
Reply
March 4, 2013, 6:17 am
thedoctor4509
thedoctor4509 says:
@nakamura_shop Thank you for the help! I really do appreciate it, however in trying to adjust the size, it snapped. I'm sure I can still take a picture showing the size, though. Thank you really!
Reply
March 2, 2013, 7:02 pm
nakamura_shop
nakamura_shop says:
@Liwan & @holicaholic thanks!! i'm happy to hear this!!
Reply
March 2, 2013, 9:40 am
nakamura_shop
nakamura_shop says:
@thedoctor4509 if you receive a wrong size yoy only have to send a photo of the wrong item to service@Shapeways.com explain your problem and they'll solve the problem. if the ordered model is different by the sent model we can verify it.
Reply
March 2, 2013, 9:38 am
holicaholic
holicaholic says:
Just got mine in, its AWESOME! the bronze is very durable and looks amazing!
Reply
March 1, 2013, 6:02 pm
thedoctor4509
thedoctor4509 says:
Tried to adjust the wings because it was too small, and it snapped. I'll probably buy another and hope that they send the right size next time.
Reply
March 1, 2013, 5:53 am
Liwan
Liwan says:
I bought this as a valentines gift for my girlfriend and its awesome! Though I bought a simple stainless steel version its very robust (for a ring) and looks great, thank you!
Reply
February 26, 2013, 12:32 pm
bartv
bartv says:
@icykrazy sorry to hear that.. Please contact our Customer Service team at service@Shapeways.com. Thanks!
Reply
February 25, 2013, 10:46 am
icykrazy
icykrazy says:
Hi, i had a problem with my orders that i received. It was the wrong size. Who can i seek help from?
Reply
February 25, 2013, 3:41 am
Aeleana
Aeleana says:
@Hartland I use this chart here. :D http://www.celtarts.com/ring_size.htm
Reply
February 7, 2013, 1:56 am
nakamura_shop
nakamura_shop says:
@Aeleana I understand your problem,i've already checked your order, you payed for a 18mm and i uploaded a 18mm, i'll help you to receive a right ring for free. i think this is too much,i'll contact you in private
Reply
February 6, 2013, 10:25 pm
Aeleana
Aeleana says:
I chose the 18 mm and this is, I'm sorry, really starting to frustrate me. I ordered a 18mm ring, and I received today a ring bigger than my last! I measured the inside and it's 22mm! I had my mother over my shoulder when I purchased this 2nd one and she knows I clicked 18mm. Something is very wrong here. (I love this ring and would love to have my own, but I am consistently meeting disappointment. Even if I gained 50 lbs, this ring would not even fit my thumb.)
Reply
February 6, 2013, 9:41 pm
nakamura_shop
nakamura_shop says:
look this link with conversion http://www.themeter.net/ring_e.htm O size is 17,5 in millimeters so i suggest 18mm for you
Reply
February 2, 2013, 7:40 pm
Hartland
Hartland says:
Anyone know what size is closest to UK size O?
Reply
February 2, 2013, 5:51 pm
icykrazy
icykrazy says:
@ParadoxBattleZone thanks for the info!
Reply
January 22, 2013, 7:20 am
Aeleana
Aeleana says:
@ParadoxBattleZone Awesome, thank you so much! Yeah, if the inside is a little worn, I wouldn't mind that as long as the outer appearance is still bright. I just might get it in the coming years if my ring size changes. ;D
Reply
January 21, 2013, 3:21 am
ParadoxBattleZone
ParadoxBattleZone says:
@icykrazy Yes, it is the silver glossy
Reply
January 20, 2013, 6:22 pm
icykrazy
icykrazy says:
@ParadoxBattleZone Hi can I just check that the pic u upload is the silver glossy version?
Reply
January 20, 2013, 10:54 am
ParadoxBattleZone
ParadoxBattleZone says:
@Aeleana Here you are. This is what the ring looked like straight out of the box. By now it's slightly tarnished after a month of continuous wearing (as expected of sterling silver) but by all means it still looks shiny and nice.
Reply
January 20, 2013, 1:58 am
Aeleana
Aeleana says:
@gt4president I think closing it would ensure that the dimensions are more true, since the opening makes that part of the ring 'larger'. I think they may be a little off, because when I received mine, a size 21, I measured the diameter and it was 20 mm. Just a minor thing you may want to double check. I suggest if you do make a closed version, that the diameter is equal in every direction. Thank you for designing such a lovely piece!
Reply
January 19, 2013, 9:53 am
Aeleana
Aeleana says:
@ParadoxBattleZone Could you post a picture of it? I'd like to see how it looks. I plan on getting a glossy silver when I figure out what my ring size is, properly this time. ;D
Reply
January 19, 2013, 9:49 am
nakamura_shop
nakamura_shop says:
@olliebird and @Aeleana I see... i can only say this item require the same attention of every jewelery object,i have one for myself (the old version without enforcements) and is strong,i flexed it with attention without problems and the onli suggest i can give to all is DON'T flex the central point because is an empty space... anyway i made all that sizes only for evade this type of accident... at the moment 2% of customers snap the ring but i think next version of the item will be closed so will be impossible flex it. This is the best i can do
Reply
January 19, 2013, 1:12 am
olliebird
olliebird says:
A note to buyers. Though the creator says the ring is flexible, the stainless steel version is NOT. Got mine and there was a slight pinch in the back but overall perfect. Went to spread it by a millimeter per the instructions and it snapped instantly. Creator, you should probably take the note about flexing the wings off the description. It's misleading and quite a few buyers are snapping their rings doing this.
Reply
January 18, 2013, 7:30 pm
Aeleana
Aeleana says:
Well, it snapped.
Reply
January 18, 2013, 1:27 am
Aeleana
Aeleana says:
I believe the problem is that the wings open too much, they don't curve back to 'complete' the circle enough, so that end is larger from about the middle of the ring towards the opening.
Reply
January 18, 2013, 12:21 am
Aeleana
Aeleana says:
A size 20, I thought after measuring, would be too small but with the open back being the widest part, it's too big.
Reply
January 18, 2013, 12:15 am
Aeleana
Aeleana says:
I just received mine today, a size 21, and it's a little too large. I have tried pressing on the wings, but they haven't budged and I'm worried I may snap it.
Reply
January 18, 2013, 12:14 am
nakamura_shop
nakamura_shop says:
@Sonic1465 can i know what is the size you bought? and what is your correct size? this information is important to answer you
Reply
January 12, 2013, 10:10 am
Sonic1465
Sonic1465 says:
I just got mine today. It was a bit bigger than my finger so I went to flex it shut and the wing snapped almost instantly.
Reply
January 10, 2013, 11:57 pm
nakamura_shop
nakamura_shop says:
@Fitlerfive During last month i sold over 200 rings and no one had unlucky "accidents". I can say the problem is solved. Now you just have to choose the right size.
Reply
January 5, 2013, 11:35 am
Fitlerfive
Fitlerfive says:
Hey, I'm very interested in the ring. I'm curious though, is it still prone to snapping? Or have you fixed that problem? Thanks.
Reply
January 5, 2013, 10:03 am
nakamura_shop
nakamura_shop says:
Thank you very much!!
Reply
December 4, 2012, 5:26 pm
ParadoxBattleZone
ParadoxBattleZone says:
Received mine in the mail today and I couldn't be more pleased with the results. Fits perfectly, the silver looks great, and looks incredible overall. Fantastic work!
Reply
December 4, 2012, 5:13 am
nakamura_shop
nakamura_shop says:
it's difficult but maybe is possible...but i think that this operation will be more expensive than the ring... for now i solved the problem with the modify and the co creator model but can i see a photo of the broken ring? i never broke one and i don't understand how can this can happen
Reply
October 20, 2012, 6:41 am
RichAiken666
RichAiken666 says:
I have the same problem as Krazedjer. I just got my ring and I couldn't apply enough force to bend the wings by hand so I stuck something inside the ring and barely applied any force at all and it snapped in half. Do you know if it's possible that jewelry stores like Zales for example could solder it back together or is it too thin around the Assassin symbol to do so?
Reply
October 19, 2012, 9:36 pm
nakamura_shop
nakamura_shop says:
-Krazedjer: for that reason now the model is customizable,i have reinforced the model and now i think the problem has been solved -INUGAMI: i'm happy you like it,enjoy it! Thank you
Reply
October 19, 2012, 4:17 pm
iNUGAMi9
iNUGAMi9 says:
I have just received it finally and I'm very happy, you made a very good job. :) I love it, thanks.
Reply
October 19, 2012, 12:16 pm
krazedjer211
krazedjer211 says:
I was amazed with the ring when I got it and I also am one of the unlucky people to overstress the ring. I tried to only bend the wings and it wasn't enough. It actually broke when it was almost around my knuckle. Is there a date set that you might actually make different sizes?
Reply
October 18, 2012, 11:04 pm
nakamura_shop
nakamura_shop says:
Yes,i knew this,i need just some day and i'll made the co-creator model,with "S" "M" and "L" sizes. Flexing it, i've tested to extend up to a measure of 22 millimeters (diameter) but i have been much careful not to break and i understand your accident, the (> symbol is fragile if overstressed... I'm, really sorry for your accident Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol
Reply
October 14, 2012, 9:07 am
ABerardi0
ABerardi0 says:
saw this ring and instantly fell in love with it so i bought it and it was sent to me and it was way too small but i know you made it to be open so it would flex but i tried that and it snapped on me, made me very sad. im not angry or anything but it would be nice if you could make it a bit larger for people like me with large fingers. thank you.
Reply
October 13, 2012, 5:30 pm
iNUGAMi9
iNUGAMi9 says:
Oh, ok ! I thought that I had to address my request directly to you and not to the website staff. Thanks for your fast answer. Bye !
Reply
October 12, 2012, 8:15 pm
nakamura_shop
nakamura_shop says:
ok, i understand but i'm only the creator,an user like you,if you want informations for delivery service you have to contact the website staff. I invite you to use the forum and someone will help you soon!!
Reply
October 12, 2012, 5:46 pm
iNUGAMi9
iNUGAMi9 says:
Hi, I bought you a ring less than a month ago and I had to receive it last week ... Only there was a problem with the mail service of my country and these idiots sent back the package to you. I give you my email to talk about it, please. N.KaroO@gmail.com
Reply
October 12, 2012, 2:52 pm
nakamura_shop
nakamura_shop says:
if you like an "old" effect (like the user "Raxyn") i suggest matte,if you like a surface more smooth and shiny i suggest glossy. personally i like glossy materials,but in this case someone prefers the old effect of matte material
Reply
October 2, 2012, 4:49 pm
DrewDaltonBrown
DrewDaltonBrown says:
Which would look better, gold matte, or gold glossy?
Reply
October 2, 2012, 4:13 am
Raxyn
Raxyn says:
Thanks! I just bought it now. :)
Reply
October 1, 2012, 10:26 pm
nakamura_shop
nakamura_shop says:
The Stainless steel look like antique, is the same for all the "matte" materials (antique bronze or gold)
Reply
September 30, 2012, 2:13 pm
Raxyn
Raxyn says:
'm interested in the product, but I want the style of the product in a particular way (antique looking basically) What style is that listed as on the material types? I know, it sounds like a stupid question, but I want it to look like I just took it right out of the game, and that it is aged. Or should I buy it to look newer?
Reply
September 29, 2012, 7:06 pm
nakamura_shop
nakamura_shop says:
this ring is "open" on the rear,so you can flex it manually,the size is universal. anyway the standard size is 18mm, you can close it until 15mm and open it as you wish
Reply
August 4, 2012, 7:08 am
rkschwarm
rkschwarm says:
I really love this ring! One question though, how do you i tell you what size i need?
Reply
August 4, 2012, 3:11 am
 
Select Country
$ United States
 
Submit
Material Options

  • Stainless Steel

    Stainless Steel
    $15.08

  • Premium Silver

    Premium Silver
    $71.62

  • Silver Glossy

    Silver Glossy
    $55.10

  • Silver

    Silver
    $50.10

  • Stainless Steel

    Stainless Steel
    $15.08

  • Gold Plated Matte

    Gold Plated Matte
    $19.38

  • Gold Plated Glossy

    Gold Plated Glossy
    $19.38

  • Antique Bronze Matte

    Antique Bronze Matte
    $17.88

  • Antique Bronze Glossy

    Antique Bronze Glossy
    $17.88

  • Alumide

    Alumide
    $7.47

  • Polished Alumide

    Polished Alumide
    $7.67
 
Personalize
Add To Wishlist
Add To Favorites
Favorited by
zixolaj""
Zeldalover12""
Ollysoutter""
thebrightside1518""
Rainfall""
Strangefate""
mfusaro1011""
JGunner""
JasonC214""
InfiniteINC""
69
More by this Designer »
 
Keywords
assassin creed ring