Green Lantern Ring by david

by

i'm looking for a size 14 ring I would realy like to buy a ring before the 19 of july can you help me ?

Sat Jun 25 20:50:14 2011 by Paperfox

I am not sure if my previous message was successfully sent through.
My fiance is a complete nerd, so, he wanted a Green Lantern inspired ring, and your design is exactly what we want!!
He is in love with the design and so am I! I have taken your original design and put new measurements that I would like.
I do not know if you are a jeweler, or just a 3D modeler, but if you are, in fact, a jeweler, then please read ahead.

Below is attached the "re-vamped" picture of what he and I want in his ring. I have 42g of 14K Yellow Gold that I would like to recycle into the ring and I will provide the stone (.8 Carat Emerald.) If you're able to make this, I would be SO happy.
If you cannot make this, would you be able to make up a wax version of what I want so I can then have a jeweler make this up?

My e-mail is Christinechyrise@gmail.com, I am looking forward to hearing from you!
Please let me know!

Regards,
Christina Muir

Wed Jun 22 16:59:30 2011 by christinechyrise

Stainless Steel for material

Wed May 4 04:08:51 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:08:21 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:07:57 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:07:57 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:07:57 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:07:55 2011 by mrstoflet1284

I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site)

could you do a ring with these measurements:

Width (band): 10mm

Band Thickness: 2mm

Ring size: US 9.125 (9 1/8)

just curious.

Wed May 4 04:07:19 2011 by mrstoflet1284

Hi David,

Can you tell me the approximate diameter of the signet on a size 6 or 7 ring? Having to wear such a small ring size, I don't want the signet to be too small proportionally. I'm hoping it's somewhere around 1.2 cm, but it's obviously hard to tell from the pictures. I'm really excited about your rings and will hopefully be ordering more than one if I can confirm size.

Thanks so much

Tue Oct 12 14:37:03 2010 by lordnorth

The third image down is actually just the stainless steel ring, photoshopped green. Sorry for the confusion. Unfortunately, the stainless steel models don't come in colors directly from shapeways, only stainless steel, gold plated, and antique bronze plated as of right now.

Thu Sep 30 05:21:11 2010 by david_alan

I was just wondering what material was the third picture down. It looks like a metallic green which I would prefer instead of plastic. Would I just request a painted stainless steel or what? I do not want it to look like the fourth picture down which looks more like plastic.

Wed Sep 29 09:04:32 2010 by jjjmoore

Got mine in summer green. The shade is a little light, but the ring itself is incredibel!

Mon Aug 9 17:54:13 2010 by alphageek

Any of my rings can be sized to any size finger. All you have to do is click the "Create Your Own" link on the right side of the page of the ring you want. A new page will open where you can put in your ring size. I have almost all sizes (size 13 included) already built, so I can usually have it uploaded and ready for Shapeways to produce within 12 to 24 hours depending on when the order goes through. Feel free to let me know if you have any further questions.

Sat Jul 10 07:13:13 2010 by david_alan

I like the design does anybody have any shots of the ring on a hand. I have a "ring thing" bottle opener size 13 and it's just about the size I'd like for a green lantern ring. it's 1.8cm across the top and tapers to .5 cm at the thinnest part of the band, also the ring is pretty hefty. I would be interested in ordering all 9 lantern rings in that size if it's a possibilit

Sat Jul 10 02:28:15 2010 by Jacensolo6986

I'd be interested in one with a larger signet face. I was thinking something around 2.5 cm in diameter, with the band being 1.2 cm wide....or something along those lines at least.

Thu Apr 1 15:17:25 2010 by tubaman@tubaman.org

Any size you want, let me know. Also, since I've got you, would you prefer a larger signet face?

Tue Mar 30 14:57:02 2010 by david_alan

Okay. Good to know! Makes me glad of my tiny fingers. The one I just ordered came out with a little glitch on the logo that might grind out, might not. So I may need yet another. And now I can order it just a smidge smaller, too.

Tue Mar 30 13:42:05 2010 by TommySaysSoWhat

It is now a co-creator model. I guestimated the maximum volume of material that could be used, and I brought the price up. As I understand it, the size 10 ring (that the model is based on should still be 11.50, it's just more expensive the larger the size of the ring.

Tue Mar 30 01:53:59 2010 by david_alan

Wow, this is suddenly more than twice the price it was when I ordered one a couple weeks ago? ($11.50 vs. $27.50)

Tue Mar 30 01:32:22 2010 by TommySaysSoWhat

Actually, now that I measured it, it's more a 10 or 10.5.

It's still not a giant imposing ring. :)

Mon Dec 14 02:50:46 2009 by TommySaysSoWhat

I'd say this is a size 9. It's just a little bit large than my size 8 wedding band. It's not a big ring. It doesn't shout out "Hey! I'm a Green Lantern!"

The detail is nice.

I painted the indent around the logo black, the ring itself metallic green, and the logo and circle metallic green with a few layers of green glow-in-the-dark paint. I love it.

Mon Dec 14 02:36:24 2009 by TommySaysSoWhat

These rings look fantastic and I realy want one, but I need more information on them before I order any. ( see my last coment above.)

Fri Sep 25 19:43:47 2009 by David Chiasson

My ring size is 11!/2 or 12. will this ring fit My finger I want to know before I order any. By the way the rings look great. Are they molded in trasparent green?

Fri Sep 25 19:39:09 2009 by David Chiasson