This is a ring I created based on the one worn by Hal Jordan of the Green Lantern Corps. This version has a smaller face for a subtle look and feel. Choose your size from the list below and it will be added to your cart. You can select your preferred material in the cart before checkout.

Size 3 Size 3.5 Size 4 Size 4.5 Size 5
Size 5.5 Size 6 Size 6.5 Size 7 Size 7.5
Size 8 Size 8.5 Size 9 Size 9.5 Size 10
Size 10.5 Size 11 Size 11.5 Size 12 Size 12.5
Size 13 Size 13.5 Size 14 Size 14.5 Size 15

With the Shapeways Print-on-Demand service, you can order this ring in any size, in any material, at any time. Please note that, with the exception of the Full Color Sandstone material, the color, look, and feel of the ring is defined by the material you choose, not the model image.

This ring will be produced and delivered through Shapeways and it’s partners.

For questions regarding your order, please contact Shapeways through their contact page at shapeways.com/contact.

For questions regarding the design of this, or any of my other rings and models, feel free to send me a private message. Also, if you have any ideas for new rings that you would like to see me design, please let me know.

Green Lantern, Hal Jordan, and all related marks are trademarks of Warner Bros. and DC Comics.

Dimensions

IN: 0.877 w x 0.439 d x 0.95 h
CM: 2.228 w x 1.114 d x 2.414 h

Comments

Sign In or Join to comment.
 
Now with the addition of green material, could u possibly add the green nylon to this ring's materials?
June 17, 2014, 11:17 pm
Unfortunately, not the way shapeways works.
February 28, 2013, 4:33 am
Can you put a stone in the middle that is green?
February 28, 2013, 3:11 am
@bigmac2192 Not at the moment, unfortunately. But I am working on updating the models to be compatible with the full color sandstone material.
January 14, 2013, 5:06 am
Do you make these in green?
January 14, 2013, 2:25 am
i'm looking for a size 14 ring I would realy like to buy a ring before the 19 of july can you help me ?
June 25, 2011, 8:50 pm
I am not sure if my previous message was successfully sent through. My fiance is a complete nerd, so, he wanted a Green Lantern inspired ring, and your design is exactly what we want!! He is in love with the design and so am I! I have taken your original design and put new measurements that I would like. I do not know if you are a jeweler, or just a 3D modeler, but if you are, in fact, a jeweler, then please read ahead. Below is attached the "re-vamped" picture of what he and I want in his ring. I have 42g of 14K Yellow Gold that I would like to recycle into the ring and I will provide the stone (.8 Carat Emerald.) If you're able to make this, I would be SO happy. If you cannot make this, would you be able to make up a wax version of what I want so I can then have a jeweler make this up? My e-mail is Christinechyrise@gmail.com, I am looking forward to hearing from you! Please let me know! Regards, Christina Muir
June 22, 2011, 4:59 pm
Stainless Steel for material
May 4, 2011, 4:08 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:08 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:07 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:07 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:07 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:07 am
I am thinking about ordering this ring possibly or the Kyle Rayner style but I need these measurements if it works (please ask me any question since I am not good with the conversions on this site) could you do a ring with these measurements: Width (band): 10mm Band Thickness: 2mm Ring size: US 9.125 (9 1/8) just curious.
May 4, 2011, 4:07 am
Hi David, Can you tell me the approximate diameter of the signet on a size 6 or 7 ring? Having to wear such a small ring size, I don't want the signet to be too small proportionally. I'm hoping it's somewhere around 1.2 cm, but it's obviously hard to tell from the pictures. I'm really excited about your rings and will hopefully be ordering more than one if I can confirm size. Thanks so much
October 12, 2010, 2:37 pm
The third image down is actually just the stainless steel ring, photoshopped green. Sorry for the confusion. Unfortunately, the stainless steel models don't come in colors directly from shapeways, only stainless steel, gold plated, and antique bronze plated as of right now.
September 30, 2010, 5:21 am
I was just wondering what material was the third picture down. It looks like a metallic green which I would prefer instead of plastic. Would I just request a painted stainless steel or what? I do not want it to look like the fourth picture down which looks more like plastic.
September 29, 2010, 9:04 am
Got mine in summer green. The shade is a little light, but the ring itself is incredibel!
August 9, 2010, 5:54 pm
Any of my rings can be sized to any size finger. All you have to do is click the "Create Your Own" link on the right side of the page of the ring you want. A new page will open where you can put in your ring size. I have almost all sizes (size 13 included) already built, so I can usually have it uploaded and ready for Shapeways to produce within 12 to 24 hours depending on when the order goes through. Feel free to let me know if you have any further questions.
July 10, 2010, 7:13 am
I like the design does anybody have any shots of the ring on a hand. I have a "ring thing" bottle opener size 13 and it's just about the size I'd like for a green lantern ring. it's 1.8cm across the top and tapers to .5 cm at the thinnest part of the band, also the ring is pretty hefty. I would be interested in ordering all 9 lantern rings in that size if it's a possibilit
July 10, 2010, 2:28 am
I'd be interested in one with a larger signet face. I was thinking something around 2.5 cm in diameter, with the band being 1.2 cm wide....or something along those lines at least.
April 1, 2010, 3:17 pm
Any size you want, let me know. Also, since I've got you, would you prefer a larger signet face?
March 30, 2010, 2:57 pm
Okay. Good to know! Makes me glad of my tiny fingers. The one I just ordered came out with a little glitch on the logo that might grind out, might not. So I may need yet another. And now I can order it just a smidge smaller, too.
March 30, 2010, 1:42 pm
It is now a co-creator model. I guestimated the maximum volume of material that could be used, and I brought the price up. As I understand it, the size 10 ring (that the model is based on should still be 11.50, it's just more expensive the larger the size of the ring.
March 30, 2010, 1:53 am
Wow, this is suddenly more than twice the price it was when I ordered one a couple weeks ago? ($11.50 vs. $27.50)
March 30, 2010, 1:32 am
Actually, now that I measured it, it's more a 10 or 10.5. It's still not a giant imposing ring. :)
December 14, 2009, 2:50 am
I'd say this is a size 9. It's just a little bit large than my size 8 wedding band. It's not a big ring. It doesn't shout out "Hey! I'm a Green Lantern!" The detail is nice. I painted the indent around the logo black, the ring itself metallic green, and the logo and circle metallic green with a few layers of green glow-in-the-dark paint. I love it.
December 14, 2009, 2:36 am
These rings look fantastic and I realy want one, but I need more information on them before I order any. ( see my last coment above.)
September 25, 2009, 7:43 pm
My ring size is 11!/2 or 12. will this ring fit My finger I want to know before I order any. By the way the rings look great. Are they molded in trasparent green?
September 25, 2009, 7:39 pm
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.